Search results for "rnmg 43"

SIMVJNL 28-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$375.00 $607.50

SIMVJNL 28-4 — boring bar, 1.75" bar diameter, 3.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MRGNL 16-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNL 16-6D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

H24 NRR 3 Interchangeable Head for CNC Turning

$460.11 $745.38

H24 NRR 3 — interchangeable head, 1.500" head diameter, 2.000" minimum bore. Made in the USA by RMC Tooling. H-NRR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

NRR 16-3D Indexable Tool Holder for CNC Turning

$145.72 $236.06

NRR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Corner Grooving External Toolholder for Grooving NU Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back...

MRGNR 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMDJNR 32-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$403.86 $654.26

SIMDJNR 32-4 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMVJNR 24-3 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$346.17 $560.80

SIMVJNR 24-3 — boring bar, 1.50" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

H40 NEL 3W Interchangeable Head for CNC Turning

$490.38 $794.42

H40 NEL 3W — interchangeable head, 2.500" head diameter, 3.000" minimum bore. Made in the USA by RMC Tooling. H-NDXPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

H40 NER 3W Interchangeable Head for CNC Turning

$490.38 $794.42

H40 NER 3W — interchangeable head, 2.500" head diameter, 3.000" minimum bore. Made in the USA by RMC Tooling. H-NDXPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MRGNL 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$75.04 $121.56

MRGNL 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMDJNR 32-5 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$403.86 $654.26

SIMDJNR 32-5 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

WNMG 431 CHIP BREAKER FC GRADE TN30 / WNMG 080404 FC TN30

$10.66 $11.84

WNMG 431 CHIP BREAKER FC GRADE TN30 / WNMG 080404 FC TN30 Canela Turning Insert [10 inserts per box]

MRGNR123B Tool Holder RNMG 32 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNR16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MRGNR 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-4E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

H40 NEL 4W Interchangeable Head for CNC Turning

$490.38 $794.42

H40 NEL 4W — interchangeable head, 2.500" head diameter, 3.250" minimum bore. Made in the USA by RMC Tooling. H-NDXPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MDJNR16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MWLNR20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSRNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSSNL16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

MRGNL 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNL20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSSNR12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

PTGNR20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MRGNL 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.12 $139.52

MRGNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MRGNL165D Tool Holder RNMG 54 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNR12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

H40 MVUNR 3 Interchangeable Head for CNC Turning

$533.65 $864.52

H40 MVUNR 3 — interchangeable head, 2-1/2" head diameter. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting...

H40 NER 4W Interchangeable Head for CNC Turning

$522.05 $845.72

H40 NER 4W — interchangeable head, 2.500" head diameter, 3.250" minimum bore. Made in the USA by RMC Tooling. H-NDXPR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

H20 NRR 3 Interchangeable Head for CNC Turning

$418.28 $677.62

H20 NRR 3 — interchangeable head, 1.250" head diameter, 1.750" minimum bore. Made in the USA by RMC Tooling. H-NRR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

H40 MSSNR 6W Interchangeable Head for CNC Turning

$406.67 $658.80

H40 MSSNR 6W — interchangeable head, 2.500" head diameter, 3.250" minimum bore. Made in the USA by RMC Tooling. H-MSSNR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMDJNR 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$375.00 $607.50

SIMDJNR 28-4 — boring bar, 1.75" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

PSSNL12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

PSSNL16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

PSKNR20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSKNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSKNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSKNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 $10.84

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15 Canela Turning Insert [10 inserts per box]

MRGNR 08-3A Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.12 $139.52

MRGNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MRGNR 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNR 10-4B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MRGNL 20-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$95.20 $154.22

MRGNL 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

DTJNR244EAN Tool Holder 93° Lead Angle TNM 43 Insert

$162.27

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTUNL20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTFNR20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...