Search results for "snma 432"

MSSNR Tool Holder

MSSNR 20-4D Indexable Tool Holder for CNC Turning

$95.20 $154.22

MSSNR 20-4D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
MSKNL Tool Holder

MSKNL 16-4D Indexable Tool Holder for CNC Turning

$86.53 $140.18

MSKNL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSKNL Tool Holder

MSKNL 20-4D Indexable Tool Holder for CNC Turning

$95.20 $154.22

MSKNL 20-4D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
MSRNR Tool Holder

MSRNR 16-4D Indexable Tool Holder for CNC Turning

$86.53 $140.18

MSRNR 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSKNR Tool Holder

MSKNR 12-4B Indexable Tool Holder for CNC Turning

$75.04 $121.56

MSKNR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSKNR Tool Holder

MSKNR 20-4D Indexable Tool Holder for CNC Turning

$95.20 $154.22

MSKNR 20-4D — toolholder, 1-1/4" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
MSRNL Tool Holder

MSRNL 12-4B Indexable Tool Holder for CNC Turning

$75.04 $121.56

MSRNL 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSRNL Tool Holder

MSRNL 12-4C Indexable Tool Holder for CNC Turning

$75.00 $121.50

MSRNL 12-4C — toolholder, 3/4" square shank, 5.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...
MSRNR Tool Holder

MSRNR 12-4B Indexable Tool Holder for CNC Turning

$75.04 $121.56

MSRNR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
Canela SNMG432KC square turning insert, grade TK15

SNMG 432 Turning Insert, KC Chipbreaker, 0.031" Corner Radius, Grade TK15

$10.59

Canela reference SNMG432KC — square turning insert, grade TK15. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432KC Insert shape: square (S) Clearance angle: 0° Chipbreaker: KC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
MSSN cartridge - Canela, FM Carbide

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
SIMSKNL Boring Bar

SIMSKNL 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNL 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSSN cartridge - Canela, FM Carbide

MSSNR10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...
CNMA 120408 GradeFM2533 / CNMA 432 #FMCarbide

CNMA 120408 Grade FM2533 / CNMA 432 #FMCarbide

$8.21 $10.26

CNMA 120408 GradeFM2533 / CNMA 432 #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained Selection help: FM Carbide Chip Breaker Legend & Grade Selection Chart →
SIMSKNR Boring Bar

SIMSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 $607.50

SIMSKNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMSKNR Boring Bar

SIMSKNR 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNR 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN103B Tool Holder 45° Lead Angle SNM 32 Insert

$64.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSN cartridge - Canela, FM Carbide

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNL16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNL10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...
Canela SNMG543RC square turning insert, grade TN30

SNMG 543 Turning Insert, RC Chipbreaker, 0.047" Corner Radius, Grade TN30

$16.68

Canela reference SNMG543RC — square turning insert, grade TN30. Original Canela indexable insert, 0.625" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG543RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.625" Thickness (T): 0.250" Inscribed circle (d): 0.625" Corner radius...
MSKN cartridge - Canela, FM Carbide

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSTNR20CA-5C Cartridge — Canela, FM Carbide

MSTNL12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNL12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN083A Tool Holder 45° Lead Angle SNM 32 Insert

$61.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela SNMG644RC square turning insert, grade TN30

SNMG 644 Turning Insert, RC Chipbreaker, 0.063" Corner Radius, Grade TN30

$22.15

Canela reference SNMG644RC — square turning insert, grade TN30. Original Canela indexable insert, 0.750" cutting edge and 0.063" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG644RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.750" Thickness (T): 0.250" Inscribed circle (d): 0.750" Corner radius...
CNMA 190612 Grade FM2533 / CNMA 643 #FMCarbide

CNMA 190612 Grade FM2533 / CNMA 643 #FMCarbide

$18.56 $23.20

CNMA 190612 Grade FM2533 / CNMA 643 #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained Selection help: FM Carbide Chip Breaker Legend & Grade Selection Chart →
RMC Insert Shims

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...
CNMG 120408 Chip Breaker BR Grade FM2533 / CNMG 432 BR #FMCarbide

CNMG 120408 Chip Breaker BR Grade FM2533 / CNMG 432 BR #FMCarbide

$8.21 $10.26

CNMG 120408 Chip Breaker BR Grade FM2533 / CNMG 432 BR #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained Selection help: FM Carbide Chip Breaker Legend & Grade Selection Chart →
RMC Insert Shims

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...