Search results

MTRNR 24-6E Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 each

MTRNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNR 20-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$95.20 each

MTRNR 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S20U-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTUNR12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTCNN443F Tool Holder 90° Lead Angle TNM 33 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTRNR164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTRNR 16-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTRNR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNR 10-3B Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$95.49 each

MTRNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTCNN124B Tool Holder 90° Lead Angle TNM 43 Insert

$96.70 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S28U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$316.03 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTLNR 16-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 each

MTLNR 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15

$9.25 each

10 inserts per box

Canela reference TNMG332-MC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

WTENNS164D Tool Holder 60° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNRS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 each

Right Hand Tool Holder MTJN R S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 16-4D Shank height (A):...

MTJNLS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 each

Left Hand Tool Holder MTJN L S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNLS 16-4D Shank height (A):...

TNMG 332 CHIP BREAKER MHC GRADE TN30 / TNMG 160408 MHC TN30

$9.25 each

10 inserts per box

Canela reference TNMG332-MHC — triangular (T) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MHC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MHC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

MTRNL 16-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTRNL 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTHOL 20-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$138.47 each

MTHOL 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTFNL12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTRNL 16-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTRNL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNL 16-3D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$81.64 each

MTRNL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTRNR 16-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTRNR 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTJNLS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$81.68 each

Left Hand Tool Holder MTJN L S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semifinishing and finishing. ​Specifications Model: MTJNLS 12-3B Shank height (A): 0.750"...

MTUNL20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTFNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MTJNLS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 each

Left Hand Tool Holder MTJN L S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNLS 16-3D Shank height (A):...

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S28U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$316.03 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTEN NS 16-4D Tool Holder 60° End Cutting Edge Angle TNM__43__ Insert

$79.05 each

Neutral Hand Tool Holder MTENNS 16-4D - OAL = 6" - A = 1"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 16-4D Shank height (A): 1.000" Shank width (B): 1.000" Overall length (C): 6.00"...

MTHOL 20-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$157.83 each

MTHOL 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTJNR S20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 each

Right Hand Tool Holder MTJN R S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 20-4D Shank height (A):...

MTJNLS 20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 each

Left Hand Tool Holder MTJN L S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNLS 20-4D Shank height (A):...

MTGNR164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 332 CHIP BREAKER MC GRADE TN35 / TNMG 160408 MC TN35

$9.25 each

10 inserts per box

Canela reference TNMG332-MC — triangular (T) turning insert, grade TN35. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

MTJNL 16-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTJNL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

MTGNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMA 160408 Grade FM324 / TNMA 332 #FMCarbide

$7.74 each

10 inserts per box

TNMA 160408 / TNMA 332, grade FM324 — negative triangular turning insert.3/8" inscribed circle, 3/16" thick, 1/32" corner radius. FM324 is a PVD grade — universal multi-purpose grade for mid and low cutting speeds — low-carbon and alloyed steel, stainless, cast iron, Inconel and titanium alloys.Specifications Insert designation (ISO): TNMA...

TNMA 332 Turning Insert, 0.031" Corner Radius, Grade TK15

$9.13 each

10 inserts per box

Canela reference TNMA332 — triangular turning insert, grade TK15. Original Canela indexable insert, 0.650" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMA332 Insert shape: triangular (T) Clearance angle: 0° Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius (r): 0.031"...

MTJNRS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 each

Right Hand Tool Holder MTJN R S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 16-3D Shank height (A):...

MTHOR 20-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$138.47 each

MTHOR 20-5D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTHOR 16-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$92.32 each

MTHOR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

SIMTFNR 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNR 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTFNL 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 each

SIMTFNL 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TNMG 332 CHIP BREAKER MFC GRADE TN15 / TNMG 160408 MFC TN15

$9.25 each

10 inserts per box

Canela reference TNMG332-MFC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MFC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MFC Thickness (T): 3/16" (4.76 mm) Inscribed circle...