Search results

MTFNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MTHOL 12-4B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 each

MTHOL 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

DTGNL163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTGNL164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SI-MTFNL 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 each

SI-MTFNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

DTJNL244EAN Tool Holder 93° Lead Angle TNM 43 Insert

$162.27 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTHOL 12-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 each

MTHOL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

SIMTFNR 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 each

SIMTFNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TNMG 332 CHIP BREAKER MFC GRADE TN30 / TNMG 160408 MFC TN30

$9.25 each

10 inserts per box

Canela reference TNMG332-MFC — triangular (T) turning insert, grade TN30. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: TNMG332-MFC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MFC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

WTENNS163D Tool Holder 60° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 each

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

TNMG 433 Turning Insert, MC Chipbreaker, 0.047" Corner Radius, Grade TN15

$11.40 each

10 inserts per box

Canela reference TNMG433MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG433MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MTHOL 16-5D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$92.32 each

MTHOL 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTHOL 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 each

MTHOL 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTGNR246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

5100 Hex Key Wrench — A1/16"

$2.13 each

Canela reference 5100 — hex key wrench. Original wrench for Canela indexable tooling. Sold individually, no minimum order.Specifications Reference: 5100 Part type: Hex Key Wrench Short arm (a): 0.590" Long arm (b): 1.773" Key size: A1/16" Tightening torque: 0.6 N·m Brand: Canela Dimensions in inches, as published in the Canela...

MTGNR20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTRNL245E Tool Holder 75° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTRNL205D Tool Holder 75° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SI-MTFNL 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 each

SI-MTFNL 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTFNR 40-5 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S16T-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S16T-MTUNR3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTFNR 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 each

SIMTFNR 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S20U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DTJNL123BAN Tool Holder 93° Lead Angle TNM 33 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNL 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 each

MTJNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

SIMTJNL 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 each

SIMTJNL 24-4 — boring bar, 1.50" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40 each

10 inserts per box

Canela reference TNMG432MC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

TNMG 433 Turning Insert, MHC Chipbreaker, 0.047" Corner Radius, Grade TN30

$11.40 each

10 inserts per box

Canela reference TNMG433MHC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG433MHC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

S20U-WTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTGNR 08-2A Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 each

MTGNR 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTGNL246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

VCMT 221 Turning Insert, 0.016" Corner Radius, Grade TN15

$10.69 each

10 inserts per box

Canela reference VCMT221 — 35° rhombic turning insert, grade TN15. Original Canela indexable insert, 0.433" cutting edge and 0.016" corner radius. Sold individually, no minimum order.Specifications Reference: VCMT221 Insert shape: 35° rhombic (V) Clearance angle: 7° Cutting edge length (l): 0.433" Thickness (T): 0.125" Inscribed circle (d): 0.250" Corner radius...

MTGNR245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SI-MTFNR 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 each

SI-MTFNR 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTRNR205D Tool Holder 75° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$157.22 each

MTGNR 86-4E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

S24U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTHOR 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$62.90 each

MTHOR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTGNR205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SI-MTFNL 40-6 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$362.97 each

SI-MTFNL 40-6 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...