Search results for "TNM 43"

PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL16CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MTFN cartridge - Canela, FM Carbide

MTFNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
SIMTJNL Boring Bar

SIMTJNL 28-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 $560.80

SIMTJNL 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNR123BN Tool Holder 90° Lead Angle TNM 33 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTJNLS 20-4D Tool Holder — Canela, FM Carbide

MTJNLS 20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 $89.76

Left Hand Tool Holder MTJN L S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
MTUN cartridge - Canela, FM Carbide

MTUNL12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MDJN cartridge - Canela, FM Carbide

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNL12CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
SIMTFNR Boring Bar

SIMTFNR 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 $560.80

SIMTFNR 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTFN cartridge - Canela, FM Carbide

MTFNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTUN cartridge - Canela, FM Carbide

MTUNL16CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
SIMTFNR Boring Bar

SI-MTFNR 28-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$290.38 $362.98

SI-MTFNR 28-3 — boring bar, 1.75" bar diameter, 2.030" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTJNL Boring Bar

SIMTJNL 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTJNL 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTJNL Boring Bar

SIMTJNL 16-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 $420.60

SIMTJNL 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTGN cartridge - Canela, FM Carbide

MTGNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
RMC Insert Shims

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 $9.94

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...
SIMVJNR Boring Bar

SIMVJNR 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 $747.70

SIMVJNR 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
SIMTJNL Boring Bar

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
SIMTJNR Boring Bar

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL12CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNR12CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNR12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNR16CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNR16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
SIMTJNR Boring Bar

SIMTJNR 28-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 $560.80

SIMTJNR 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTFN cartridge - Canela, FM Carbide

MTFNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTGN cartridge - Canela, FM Carbide

MTGNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
SIMVJNL Boring Bar

SIMVJNL 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 $747.70

SIMVJNL 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
MTJNRS 16-4D Tool Holder — Canela, FM Carbide

MTJNRS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 $81.68

Right Hand Tool Holder MTJN R S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
SIMTJNL Boring Bar

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTJNR S20-4D Tool Holder — Canela, FM Carbide

MTJNR S20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 $89.76

Right Hand Tool Holder MTJN R S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL16CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGN cartridge - Canela, FM Carbide

MTGNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MDJN cartridge - Canela, FM Carbide

MDJNR16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S16T-WTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNR163DAN Tool Holder 93° Lead Angle TNM 33 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTJNLS 12-3B Tool Holder — Canela, FM Carbide

MTJNLS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$81.68

Left Hand Tool Holder MTJN L S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semifinishing and finishing. ​Inserts that fit this toolBy its ANSI designation...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDJN cartridge - Canela, FM Carbide

MDJNL20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNR163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...