Search results for "TNM 43"

DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNR163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MWLN cartridge - Canela, FM Carbide

MWLNR12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR103B Tool Holder 90° Lead Angle TNM 33 Insert

$64.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNL123BN Tool Holder 90° Lead Angle TNM 33 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DTGNR204DN Tool Holder — Canela, FM Carbide

DTGNL163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNR4 Boring Bar — Canela, FM Carbide

S16T-MTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DTJNR244EAN Tool Holder — Canela, FM Carbide

DTJNL163DAN Tool Holder 93° Lead Angle TNM 33 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN cartridge - Canela, FM Carbide

MTFNL12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTGN cartridge - Canela, FM Carbide

MTGNL12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTJNLS 16-4D Tool Holder — Canela, FM Carbide

MTJNLS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 $81.68

Left Hand Tool Holder MTJN L S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
MTJNL Tool Holder

MTJNL 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTJNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...
MTJNRS 12-3B Tool Holder — Canela, FM Carbide

MTJNRS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$74.32 $76.80

Right Hand Tool Holder MTJN R S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing.Inserts that fit this toolBy its ANSI designation...
MTJNLS 16-3D Tool Holder — Canela, FM Carbide

MTJNLS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 $81.68

Left Hand Tool Holder MTJN L S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN854D Tool Holder 45° Lead Angle SNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNL244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL163D Tool Holder 75° Lead Angle TNM 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTJNRS 16-3D Tool Holder — Canela, FM Carbide

MTJNRS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 $81.68

Right Hand Tool Holder MTJN R S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MWLNR Boring Bar

S40 MWLNR 4 Indexable Boring Bar for CNC Turning

$432.70 $700.98

S40 MWLNR 4 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...
MTFNR Interchangeable Head

H40 MTFNR 4 Interchangeable Head for CNC Turning

$490.38 $794.42

H40 MTFNR 4 — interchangeable head, 2.500" head diameter, 3.030" minimum bore. Made in the USA by RMC Tooling. H-MTFNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
MTANR245D Tool Holder — Canela, FM Carbide

MTANR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S16T-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S16T-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MSTNR20CA-5C Cartridge — Canela, FM Carbide

MSTNR12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...