Search results

PSSNR16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

S40V-MSKNR6 Boring Bar 75° Lead Angle SNM 64 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSTNL12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SNMG 120408 Chip Breaker BG Grade FM524 / SNMG 432 BG #FMCarbide

$5.24 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM524 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade — gray cast iron...

PSC50-DSSNR35052-12 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSSNR35052-12 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSSNR35052-12 Coupling: PSC...

MSKNR246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMA 190616 Grade FM2533 / SNMA 644 #FMCarbide

$11.26 each

10 inserts per box

SNMA 190616 / SNMA 644, grade FM2533 — negative square turning insert.3/4" inscribed circle, 1/4" thick, 1/16" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 190616 Insert designation (inch): SNMA...

SNMG 120408 Chip Breaker BC Grade FM2543 / SNMG432 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

SNMG 433 CHIP BREAKER RC GRADE TN30 / SNMG 120412 RC TN30

$9.76 each

10 inserts per box

Canela reference SNMG433-RC — square (S) turning insert, grade TN30. Original Canela indexable insert and 3/64" (1.19 mm) corner radius. Sold individually, no minimum order.Specifications Reference: SNMG433-RC ISO designation: SNMG 120412 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: RC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

SNMG 120408 Chip Breaker BG Grade FM2533 / SNMG 432 BG #FMCarbide

$8.21 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade — stable steel applications...

SNMG 432 Turning Insert, KC Chipbreaker, 0.031" Corner Radius, Grade TK15

$10.59 each

10 inserts per box

Canela reference SNMG432KC — square turning insert, grade TK15. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432KC Insert shape: square (S) Clearance angle: 0° Chipbreaker: KC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

PSSNR12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

SNMX1206ANSN Milling Insert — Grades ML30 and TL40

$15.19 each

10 inserts per box

Canela reference SNMX1206ANSN — 90° square milling insert, grades ML30 and TL40. Original Canela indexable milling insert. Sold individually, no minimum order.The SNMX designation follows ISO 1832: S 90° square shape, N 0° clearance angle, M tolerance class, X special fixing and chipbreaker form.Specifications Reference: SNMX1206ANSN Insert shape: 90° square...

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSKNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSYNL12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

S40V-MSKNL6 Boring Bar 75° Lead Angle SNM 64 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PSKNL12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

PSKNL20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SNMG 120404 Chip Breaker BMF Grade FM2553 / SNMG 431 BMF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BMF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BMF breaker is the finishing geometry: 0.003–0.012 ipr (0.07–0.3 mm/rev) at 0.01–0.06" (0.2–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

PSKNR16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

MSKNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSYNL16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSRNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSKNR 10-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$83.38 each

MSKNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SNMG 120412 Chip Breaker BR Grade FM324 / SNMG 433 BR #FMCarbide

$7.92 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BR, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for...

MSDNN856D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMA 190616 Grade FM524 / SNMA 644 #FMCarbide

$10.22 each

10 inserts per box

SNMA 190616 / SNMA 644, grade FM524 — negative square turning insert.3/4" inscribed circle, 1/4" thick, 1/16" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): SNMA 190616 Insert designation...

MSKNL 12-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$62.92 each

MSKNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SNMA 150612 Grade FM2533 / SNMA 543 #FMCarbide

$12.33 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM2533 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation (inch): SNMA...

SNMA150612 Grade FM524 / SNMA 543 #FMCarbide

$7.88 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM524 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation...

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN206D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120404 Chip Breaker BF Grade FM2553 / SNMG 431 BF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

MSKNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

PSC63-DSDNN00065-12 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00065-12 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00065-12 Coupling: PSC...

SNMG 120404 Chip Breaker BF Grade FM324 / SNMG 431 BF #FMCarbide

$7.92 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for...

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 each

10 inserts per box

Canela reference SNMG431-FMC — square (S) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Sold individually, no minimum order.Specifications Reference: SNMG431-FMC ISO designation: SNMG 120404 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

SNMG 120404 Chip Breaker BF Grade FM2543 / SNMG 431 BF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general...

MSRNR246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR 24-8E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 each

MSKNR 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSKNL246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...