Search results

MSRNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSYNR16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSKNR20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

MSTNR20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSKNL25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

MSSNR20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSRNR20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSYNL20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSSNL20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSRNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSDNN083A Tool Holder 45° Lead Angle SNM 32 Insert

$61.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

MSDNN103B Tool Holder 45° Lead Angle SNM 32 Insert

$64.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNL20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSYNR20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSSNR124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

H32 MSKNR 6W Interchangeable Head for CNC Turning

$390.38 each

H32 MSKNR 6W — interchangeable head, 2" head diameter. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting...

H32 DSSNR 6W Interchangeable Head for CNC Turning

$464.43 each

H32 DSSNR 6W — interchangeable head, 2.000" head diameter, 2.500" minimum bore. Made in the USA by RMC Tooling. H-DSSNR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...

1806 Hex Socket Screw — M6x1, A4 key, 3.5 N·m

$4.20 each

Canela reference 1806 — hex socket screw. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 1806 Part type: Hex Socket Screw Thread (a): M6x1 Dimension b: 0.984" Dimension c: 1.110" Dimension d: 0.413" Wrench size: A4 Tightening torque: 3.5 N·m Brand: Canela...

1504 Screw — M4x0.7, A2 key, 1.4 N·m

$2.13 each

Canela reference 1504 — screw. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 1504 Part type: Screw Thread (a): M4x0.7 Dimension b: 0.078" Dimension c: 0.157" Wrench size: A2 Tightening torque: 1.4 N·m Brand: Canela Dimensions in inches, as published in the...

5002 Hex Key Wrench — A2, 1.4 N·m

$2.13 each

Canela reference 5002 — hex key wrench. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 5002 Part type: Hex Key Wrench Dimension a: 0.708" Dimension b: 2.027" Wrench size: A2 Tightening torque: 1.4 N·m Brand: Canela Dimensions in inches, as published in...

5102 Hex Key Wrench — A5/64”, 1.4 N·m

$2.13 each

Canela reference 5102 — hex key wrench. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 5102 Part type: Hex Key Wrench Dimension a: 0.679" Dimension b: 2.007" Wrench size: A5/64” Tightening torque: 1.4 N·m Brand: Canela Dimensions in inches, as published in...

DSRNR124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-DSRNR27060-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSRNR27060-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNR27060-19 Coupling: PSC 50 (ISO...

DSRNL124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-PSRNL27060-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-PSRNL27060-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSRNL27060-19 Coupling: PSC 50 (ISO...

MSDNN124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR124BN Tool Holder 45° Lead Angle SNM 43 Insert

$76.88 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-DSRNL35065-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSRNL35065-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSRNL35065-19 Coupling: PSC 63 (ISO...

MSRNR164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

2808 Washer — 0.330" ID × 0.630" OD

$1.64 each

Canela reference 2808 — washer. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 2808 Part type: Washer Dimension a: 0.063" Dimension b: 0.330" Dimension c: 0.630" Brand: Canela Dimensions in inches, as published in the Canela spare-parts catalog, section “Others”, page I17....

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...