FM CARBIDE · TOOL FINDER

Search results

886 results

MTCNN664F Tool Holder — Canela, FM Carbide

MTCNN664F Tool Holder 90° Lead Angle TNM 43 Insert

$220.41 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSRN cartridge - Canela, FM Carbide

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSTNR20CA-5C Cartridge — Canela, FM Carbide

MSTNL16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
S24U-MWLNL4 Boring Bar — Canela, FM Carbide

S16T-MWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MWLN cartridge - Canela, FM Carbide

MWLNR20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
S24U-DDUNR4N Boring Bar — Canela, FM Carbide

S20U-DDUNL4N Boring Bar 93° Lead Angle DN 43 Insert

$286.45 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
SIMTJNL Boring Bar

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNL12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSKN cartridge - Canela, FM Carbide

MSKNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNL16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
SIMTJNR Boring Bar

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSSNR866E Tool Holder — Canela, FM Carbide

MSSNR124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL124BN Tool Holder 93° Lead Angle DN 43 Insert

$119.54 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTHOR Interchangeable Head

H28 MTHOR 4 Interchangeable Head for CNC Turning

$415.41 each

H28 MTHOR 4 — interchangeable head, 1.750" head diameter, 2.625" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
S24U-MWLNR4 Boring Bar — Canela, FM Carbide

S16T-MWLNR4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
PTGNR20CA-22 Cartridge — Canela, FM Carbide

PTGNL12CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MWLN toolholder - Canela, FM Carbide

MWLNL204D Tool Holder 95° Lead Angle WNMG 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SIMTFNL 40-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTFNL 40-4 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNL12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MTFN toolholder - Canela, FM Carbide

MTFNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTUN cartridge - Canela, FM Carbide

MTUNL16CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTFN cartridge - Canela, FM Carbide

MTFNL16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTFN toolholder - Canela, FM Carbide

MTFNR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSN cartridge - Canela, FM Carbide

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNL20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNL20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MWLN toolholder - Canela, FM Carbide

MWLNL124B Tool Holder 95° Lead Angle WNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSRN cartridge - Canela, FM Carbide

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
DSDNN246EAN Tool Holder — Canela, FM Carbide

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCLN cartridge - Canela, FM Carbide

MCLNL16CA-4C Cartridge 95° Lead Angle CN 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
PCLN cartridge - Canela, FM Carbide

PCLNL16CA-12 Cartridge 95° Lead Angle CN 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCLNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTHOR Interchangeable Head

H32 MTHOR 4 Interchangeable Head for CNC Turning

$464.43 each

H32 MTHOR 4 — interchangeable head, 2.000" head diameter, 2.875" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNR16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MSKN cartridge - Canela, FM Carbide

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
S40V-MVUNL4 Boring Bar — Canela, FM Carbide

S40V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MSRN cartridge - Canela, FM Carbide

MSRNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNR16CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNL16CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNR12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTUN cartridge - Canela, FM Carbide

MTUNL12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNR12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNL20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...