Search results

MTGNL165D Tool Holder 90° Lead Angle TNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR245D Tool Holder 93° Lead Angle DN 54 Insert

$165.29 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR855D Tool Holder 93° Lead Angle DN 54 Insert

$145.55 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

DSRNL205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTANR 64-3D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 each

MTANR 64-3D — toolholder, 0.750" × 1.000" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTHOR 24-4 Indexable Boring Bar for CNC Turning

$375.00 each

SIMTHOR 24-4 — boring bar, 1.50" bar diameter, 2.250" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

MCMNN245D Tool Holder 50° Lead Angle CN 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTFNR 24-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 each

SIMTFNR 24-3 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

STCNR1654 Vertical Threading Tool Holder, Right Hand, 1.34" Shank, TNMC/TPMC-54 Inserts

$95.23 each

Canela reference STCNR1654 — right hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNR1654 Hand of tool: Right hand Shank height (A): 1.00" Shank width (B): 1.00" Overall length (C): 6.00" Dimension D: 1.34" Dimension F: 1.25" Dimension H: 0.30" Dimension V: 1.125" Insert size: TNMC/TPMC-54 Tightening...

PSKNL25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

MTANR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.04 each

MTANR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTUNL12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTGNR 24-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$109.60 each

MTGNR 24-4D — toolholder, 1.500" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MCKNR205D Tool Holder 75° Lead Angle CN 54 Insert

$103.97 each

Face turning toolholder equipped with rhombic negative double-sided inserts (angle 80°) with strong cutting edge. The double clamping (pin + clamp) ensures good rigidity and stability in roughing applications. Specifications Model: MCKNR205D Shank height (A): 1.250" Shank width (B): 1.250" Overall length (C): 6.00" Head length (D): 1.350" Dimension F:...

MCRNR205D Tool Holder 75° Lead Angle CN 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DNMG 442 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN15

$15.26 per insert$152.60 per box of 10

Canela reference DNMG442MC — 55° rhombic turning insert, grade TN15. Original Canela indexable insert, 0.610" cutting edge and 0.031" corner radius. Specifications Reference: DNMG442MC Insert shape: 55° rhombic (D) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500" Corner radius (r): 0.031"...

MTGNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

TNMG 331 CHIP BREAKER FC GRADE TN15 / TNMG 160404 FC TN15

$9.25 per insert$92.50 per box of 10

Canela reference TNMG331-FC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Specifications Reference: TNMG331-FC ISO designation: TNMG 160404 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: FC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

MWLNR 24-5E Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 80 DEGREE Trigon WNM_Inserts

$115.41 each

MWLNR 24-5E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Negative 80° Trigon WNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

TNMG 331 CHIP BREAKER FMC GRADE TN15 / TNMG 160404 FMC TN15

$9.25 per insert$92.50 per box of 10

Canela reference TNMG331-FMC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Specifications Reference: TNMG331-FMC ISO designation: TNMG 160404 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

SIMTFNR 16-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$259.63 each

SIMTFNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTUNR20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SIMTHOR 40-5 Indexable Boring Bar for CNC Turning

$461.54 each

SIMTHOR 40-5 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. I.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

MTFNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MTRNR123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR 16-3D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 each

MTFNR 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTUNL20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

S24U-WTUNR4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PTTNL16CA-16 Cartridge 60° Lead Angle TNMG 33 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL16CA-16 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

TNMG 332 CHIP BREAKER MC GRADE TN15 / TNMG 160408 MC TN15

$9.25 per insert$92.50 per box of 10

Canela reference TNMG332-MC — triangular (T) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: TNMG332-MC ISO designation: TNMG 160408 Insert shape: triangular (T) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8" (9.52 mm)...

DNGA150404 CBN Turning Insert, 55° Rhombic Negative, 0.016" Radius, Grade CB30

$83.44 each

Canela reference DNGA150404CB30 — CBN turning insert, grade CB30. Original Canela CBN insert. Sold individually, no minimum order.Specifications Reference: DNGA150404CB30 Inch designation: DNGA431 Insert shape: 55° rhombic negative insert Cutting edge length (l): 0.610" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.016" Cutting material: CBN (cubic boron...

DNGA150412 CBN Turning Insert, 55° Rhombic Negative, 0.047" Radius, Grade CB30

$83.44 each

Canela reference DNGA150412CB30 — CBN turning insert, grade CB30. Original Canela CBN insert. Sold individually, no minimum order.Specifications Reference: DNGA150412CB30 Inch designation: DNGA433 Insert shape: 55° rhombic negative insert Cutting edge length (l): 0.610" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047" Cutting material: CBN (cubic boron...

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN15

$11.40 per insert$114.00 per box of 10

Canela reference TNMG432MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.031" Grade: TN15...

PTGNR20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTFNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTRNR164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40 per insert$114.00 per box of 10

Canela reference TNMG432MC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.031" Grade: TN30...

TNMG 433 Turning Insert, MHC Chipbreaker, 0.047" Corner Radius, Grade TN30

$11.40 per insert$114.00 per box of 10

Canela reference TNMG433MHC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Specifications Reference: TNMG433MHC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047" Grade: TN30...

MTVOL 16-5D Indexable Turning Tool Holder, 1" Square Shank, Triangle Insert, Left Hand

$100.98 each

MTVOL 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. O.D. Threading & Shallow Grooving for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

DCLNR205DN Tool Holder 95° Lead Angle CN 54 Insert

$103.35 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

MSYNR12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

DCLNR245EAN Tool Holder 95° Lead Angle CN 54 Insert

$186.19 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR165D Tool Holder 93° Lead Angle DN 54 Insert

$140.83 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MTUNR4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...