Search results for "TNMA 43NGL"

MTCNN 44-3D Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$124.70 $155.87

MTCNN 44-3D — toolholder, 0.50" × 1.00" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

A32V-STCNR4 Vertical Threading Boring Bar, Right Hand, 2" Bar, TNMC-43 Inserts

$399.88

Canela reference A32V-STCNR4 — right hand vertical threading boring bar. Vertical on edge threading boring bar.Specifications Reference: A32V-STCNR4 Hand of tool: Right hand Bar diameter (D): 2.00" Dimension B: 2.260" Dimension F: 1.260" Overall length (L1): 16.00" Length L2: 1.12" Insert size: TNMC-43 Tightening torque: 3.5 N·m (insert screw) /...

MDJNL204D Tool Holder 93° Lead Angle DN 43 Insert

$129.99

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTJNL 20-3 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTJNL 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTCNN 44-3F Tool Holder 0 Degree End Cutting Edge Angle for Negative Triangle TNM_Inserts

$247.19 $308.99

MTCNN 44-3F — toolholder, 0.50" × 1.00" shank (width × height), 8.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

DSRNL164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DTJNR163DAN Tool Holder 93° Lead Angle TNM 33 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

H32 MTHOR 4W Interchangeable Head for CNC Turning

$464.43 $752.38

H32 MTHOR 4W — interchangeable head, 2.000" head diameter, 2.875" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MTFNR854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PTGNR12CA-16 Cartridge 90° Lead Angle TNMG 33 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNR12CA-16 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

S20U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTCNN443F Tool Holder 90° Lead Angle TNM 33 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMSKNL 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNL 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTUNR12CA-3C Cartridge 93° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSKNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSTNR12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STCNR1243 Vertical Threading Tool Holder, Right Hand, 1.25" Shank, TNMC/TPMC-43 Inserts

$87.88

Canela reference STCNR1243 — right hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNR1243 Hand of tool: Right hand Shank height (A): 0.75" Shank width (B): 0.75" Overall length (C): 6.00" Dimension D: 1.25" Dimension F: 1.00" Dimension H: 0.23" Dimension V: 0.906" Insert size: TNMC/TPMC-43 Tightening...

STCNL2043 Vertical Threading Tool Holder, Left Hand, 1.25" Shank, TNMC/TPMC-43 Inserts

$110.71

Canela reference STCNL2043 — left hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNL2043 Hand of tool: Left hand Shank height (A): 1.25" Shank width (B): 1.25" Overall length (C): 6.00" Dimension D: 1.25" Dimension F: 1.50" Dimension H: 0.23" Dimension V: 1.406" Insert size: TNMC/TPMC-43 Tightening...

MTFNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN854D Tool Holder 45° Lead Angle SNM 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNL204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNLS 16-3D Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$79.05 $81.68

Left Hand Tool Holder MTJN L S 16-3D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Inserts that fit this toolBy its ANSI...

DSSNL164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RNGN43 Ceramic Turning Insert, Round Negative, Grade CC7

$18.50

Canela reference RNGN43 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: RNGN43 Insert shape: Round negative insert Thickness (T): 0.187" Inscribed circle (d): 0.500" Grade: CC7 Brand: Canela Grade CC7. Hard materials (H), continuous cutting.Dimensions in inches, as published in the Canela...

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTJNLS 12-3B Tool Holder 93° End Cutting Edge Angle TNM_ 33 Insert

$81.68

Left Hand Tool Holder MTJN L S 12-3B - OAL = 4.5" - F = 1" - A = 0.75"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semifinishing and finishing. ​Inserts that fit this toolBy its ANSI designation...

DDJNL164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WTENNS164D Tool Holder 60° Lead Angle TNM 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 433 Turning Insert, MHC Chipbreaker, 0.047" Corner Radius, Grade TN30

$11.40

Canela reference TNMG433MHC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG433MHC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

SIMDJNL 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$375.00 $607.50

SIMDJNL 28-4 — boring bar, 1.75" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

WTENNS204D Tool Holder 60° Lead Angle TNM 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL124B Tool Holder 93° Lead Angle DN 43 Insert

$114.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

H24 MTHOR 4 Interchangeable Head for CNC Turning

$403.86 $654.26

H24 MTHOR 4 — interchangeable head, 1.500" head diameter, 2.625" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

S32V-WTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S28U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$316.03

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

STCNR2043 Vertical Threading Tool Holder, Right Hand, 1.25" Shank, TNMC/TPMC-43 Inserts

$110.71

Canela reference STCNR2043 — right hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNR2043 Hand of tool: Right hand Shank height (A): 1.25" Shank width (B): 1.25" Overall length (C): 6.00" Dimension D: 1.25" Dimension F: 1.50" Dimension H: 0.23" Dimension V: 1.406" Insert size: TNMC/TPMC-43 Tightening...

MRGNR854D Tool Holder RNMG 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

H24 MTHOR 4W Interchangeable Head for CNC Turning

$403.86 $654.26

H24 MTHOR 4W — interchangeable head, 1.500" head diameter, 2.625" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MTANL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNL 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTJNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MTLNL 16-4D Tool Holder -5 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTLNL 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -5° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STCNR1643 Vertical Threading Tool Holder, Right Hand, 1.25" Shank, TNMC/TPMC-43 Inserts

$95.23

Canela reference STCNR1643 — right hand vertical threading tool holder. Vertical on edge threading toolholder.Specifications Reference: STCNR1643 Hand of tool: Right hand Shank height (A): 1.00" Shank width (B): 1.00" Overall length (C): 6.00" Dimension D: 1.25" Dimension F: 1.25" Dimension H: 0.23" Dimension V: 1.156" Insert size: TNMC/TPMC-43 Tightening...

PCLNL16CA-12 Cartridge 95° Lead Angle CN 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCLNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

PSSNR12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...