Search results for "TNMA 43NGL"

S40V-MTFNL4 Boring Bar — Canela, FM Carbide

S16T-MTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S16T-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S24U-WTUNR4 Boring Bar — Canela, FM Carbide

S16T-WTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
WWLN boring bar - Canela, FM Carbide

S16T-WWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MSKN cartridge - Canela, FM Carbide

MSKNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTFN cartridge - Canela, FM Carbide

MTFNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTFN cartridge - Canela, FM Carbide

MTFNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MTGN cartridge - Canela, FM Carbide

MTGNR12CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTGN cartridge - Canela, FM Carbide

MTGNR16CA-3C Cartridge 90° Lead Angle TNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR16CA-3C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNR16CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
SIMVJNL Boring Bar

SIMVJNL 28-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$375.00 $607.50

SIMVJNL 28-4 — boring bar, 1.75" bar diameter, 3.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
Canela TNMG432MHC triangular turning insert, grade TN30

TNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40

Canela reference TNMG432MHC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MHC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
Canela TNMG433MC triangular turning insert, grade TN15

TNMG 433 Turning Insert, MC Chipbreaker, 0.047" Corner Radius, Grade TN15

$11.40

Canela reference TNMG433MC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG433MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...
MTANR245D Tool Holder — Canela, FM Carbide

MTANR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSNR866E Tool Holder — Canela, FM Carbide

MSSNL124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MDUNL5 Boring Bar — Canela, FM Carbide

A32V-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$386.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DSRNR206DAN Tool Holder — Canela, FM Carbide

DSRNR164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela DNGA431 ceramic turning insert, 55° rhombic negative insert

DNGA431 Ceramic Turning Insert, 55° Rhombic Negative, 0.016" Radius, Grade CC7

$18.13

Canela reference DNGA431 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: DNGA431 Insert shape: 55° rhombic negative insert Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.016" Grade: CC7 Brand: Canela Grade CC7. Hard materials...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S20U-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S40V-MTFNR4 Boring Bar — Canela, FM Carbide

S24U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S24U-WTUNR4 Boring Bar — Canela, FM Carbide

S24U-WTUNR4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DSRNR206DAN Tool Holder — Canela, FM Carbide

DSRNR124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNL124BAN Tool Holder 95° Lead Angle WNMG 43 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL245E Tool Holder 75° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTJNR Boring Bar

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR124B Tool Holder 93° Lead Angle DN 43 Insert

$114.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL124BAN Tool Holder 93° Lead Angle DN 43 Insert

$183.02

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
PCLN cartridge - Canela, FM Carbide

PCLNR16CA-12 Cartridge 95° Lead Angle CN 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCLNR16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MCKN cartridge - Canela, FM Carbide

MCKNL20CA-4C Cartridge 75° Lead Angle CN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCKNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNL20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
DVJNR243EAN Tool Holder — Canela, FM Carbide

DVJNL123BAN Tool Holder 93° Lead Angle VN 33 Insert

$192.93

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNR244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNR123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCFN cartridge - Canela, FM Carbide

MCFNL16CA-4C Cartridge 90° Lead Angle CN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCFNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MCLN cartridge - Canela, FM Carbide

MCLNL16CA-4C Cartridge 95° Lead Angle CN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MDJN cartridge - Canela, FM Carbide

MDJNL12CA-3C Cartridge 93° Lead Angle DN 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL12CA-3C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSRN cartridge - Canela, FM Carbide

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
SIMTFNL Boring Bar

SI-MTFNL 36-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$338.78 $423.48

SI-MTFNL 36-4 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...