Search results

MTENN 20-4D Tool Holder 30 Degree Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$95.20 each

MTENN 20-4D — toolholder, 1.250" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 30° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S20U-MTUNR3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTANL 20-6E Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$91.94 each

MTANL 20-6E — toolholder, 1.250" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S20U-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MTFNL5 Boring Bar 90° Lead Angle TNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTJNR 24-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$317.30 each

SIMTJNR 24-4 — boring bar, 1.50" bar diameter, 2.060" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MTGNL205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL855D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR103B Tool Holder 90° Lead Angle TNM 33 Insert

$64.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL246E Tool Holder 90° Lead Angle TNM 66 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTANL123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR165D Tool Holder 90° Lead Angle TNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNL865D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNR123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL163D Tool Holder 75° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTENNS103B Tool Holder 60° Lead Angle TNM 33 Insert

$74.32 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS103B Shank height (A): 0.625" Shank width (B): 0.625" Overall length (C): 4.50" Head length (D): 1.125" Insert: TNM..33.. Weight: 0.440 lb Brand: Canela Dimensions and weight...

MTFNR205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTANR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNR205D Tool Holder 75° Lead Angle TNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNL163D Tool Holder 90° Lead Angle TNM 33 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A16T-MTFN R 3 - 90° Side & End Cutting Edge Angle

$280.18 each

Right Hand Boring Bar A16T-MTFN 3 - 90° Side & End Cutting Edge Angle - OAL = 12" Cutting Length = 2.5" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A16T-MTFNR3 Bar diameter (D): 1.000" Minimum bore (A): 1.280" Overall length (L1): 12.00" Head...

A16T-MTFN L 3 - 90° Side & End Cutting Edge Angle

$280.18 each

Left Hand Boring Bar A16T-MTFN 3 - 90° Side & End Cutting Edge Angle - OAL = 12" Cutting Length = 2.5" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A16T-MTFNL3 Bar diameter (D): 1.000" Minimum bore (A): 1.280" Overall length (L1): 12.00" Head...

MTFNL245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR082A Tool Holder 90° Lead Angle TNM 22 Insert

$61.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTENNS205D Tool Holder 60° Lead Angle TNM 54 Insert

$103.97 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS205D Shank height (A): 1.250" Shank width (B): 1.250" Overall length (C): 6.00" Head length (D): 1.732" Insert: TNM..54.. Weight: 2.755 lb Brand: Canela Dimensions and weight...

MTANL082A Tool Holder 90° Lead Angle TNM 22 Insert

$61.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR165D Tool Holder 90° Lead Angle TNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTENNS082A Tool Holder 60° Lead Angle TNM 22 Insert

$74.32 each

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS082A Shank height (A): 0.500" Shank width (B): 0.500" Overall length (C): 4.00" Head length (D): 1.000" Insert: TNM..22.. Weight: 0.155 lb Brand: Canela Dimensions and weight...

A20U-MTFN L 3 - 90° Side & End Cutting Edge Angle

$299.54 each

Left Hand Boring Bar A20U-MTFN 3 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A20U-MTFNL3 Bar diameter (D): 1.250" Minimum bore (A): 1.530" Overall length (L1): 14.00" Head...

S16 MTUNR 3 Indexable Boring Bar for CNC Turning

$259.63 each

S16 MTUNR 3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

A20U-MTFN R 3 - 90° Side & End Cutting Edge Angle

$299.54 each

Right Hand Boring Bar A20U-MTFN 3 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A20U-MTFNR3 Bar diameter (D): 1.250" Minimum bore (A): 1.530" Overall length (L1): 14.00" Head...

S16 MTUNL 3 Indexable Boring Bar for CNC Turning

$259.63 each

S16 MTUNL 3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

S16 MTJNR 3 Indexable Boring Bar for CNC Turning

$259.63 each

S16 MTJNR 3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...