Search results for "TNM 43"

S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S20U-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
SIMTFNR Boring Bar

SI-MTFNR 36-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$338.78 $423.48

SI-MTFNR 36-4 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
WTENNS204D Tool Holder — Canela, FM Carbide

WTENNS163D Tool Holder 60° Lead Angle TNM 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR165D Tool Holder 90° Lead Angle TNM 54 Insert

$94.61

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNL4 Boring Bar — Canela, FM Carbide

S20U-MTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MWLN cartridge - Canela, FM Carbide

MWLNR20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTENNS246E Tool Holder — Canela, FM Carbide

MTEN NS 12-3B Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert

$74.32

Neutral Hand Tool Holder MTENNS 12-3B - OAL = 4" - A = 0.75"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 12-3B Shank height (A): 0.750" Shank width (B): 0.750" Overall length (C): 4.50"...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSRN cartridge - Canela, FM Carbide

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSTNR20CA-5C Cartridge — Canela, FM Carbide

MSTNL16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNL12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNL854D Tool Holder 93° Lead Angle DN 43 Insert

$140.83

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTENNS246E Tool Holder — Canela, FM Carbide

MTENNS103B Tool Holder 60° Lead Angle TNM 33 Insert

$74.32

Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS103B Shank height (A): 0.625" Shank width (B): 0.625" Overall length (C): 4.50" Head length (D): 1.125" Insert: TNM..33.. Weight: 0.440 lb Brand: Canela Dimensions and weight...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNR204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
SIMTFNL Boring Bar

SIMTFNL 20-3 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$288.44 $467.28

SIMTFNL 20-3 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCFN cartridge - Canela, FM Carbide

MCFNR20CA-4C Cartridge 90° Lead Angle CN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCFNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S20U-MTUNL3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
DSDNN246EAN Tool Holder — Canela, FM Carbide

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNL865D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTRNR245E Tool Holder — Canela, FM Carbide

MTRNL245E Tool Holder 75° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-WTUNR4 Boring Bar — Canela, FM Carbide

S16T-WTUNR3 Boring Bar 93° Lead Angle TNM 33 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR855D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S24U-MTUNR4 Boring Bar — Canela, FM Carbide

S20U-MTUNR3 Boring Bar 93° Lead Angle TNM 33 Insert

$299.54

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MTJNR Tool Holder

MTJNR 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTJNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...