Search results for "TNMA 43NGL"

MTGNL205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL855D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 432 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN30

$11.40

Canela reference TNMG432MC — triangular turning insert, grade TN30. Original Canela indexable insert, 0.866" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: TNMG432MC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

DSSNR204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MRGNR204D Tool Holder RNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MWLNL204D Tool Holder 95° Lead Angle WNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$295.28

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTJNL 08-2A Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$75.00 $121.50

MTJNL 08-2A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

S16T-DCLNL4N Boring Bar 95° Lead Angle CN 43 Insert

$268.26

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CNMG 431 Turning Insert, MC Chipbreaker, 0.016" Corner Radius, Grade TN35

$9.84

Canela reference CNMG431MC — 80° rhombic turning insert, grade TN35. Original Canela indexable insert, 0.508" cutting edge and 0.016" corner radius. Sold individually, no minimum order.Specifications Reference: CNMG431MC Insert shape: 80° rhombic (C) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.508" Thickness (T): 0.187" Inscribed circle (d): 0.500"...

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

H40 MTHOL 4W Interchangeable Head for CNC Turning

$490.38 $794.42

H40 MTHOL 4W — interchangeable head, 2.500" head diameter, 3.375" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

DWLNL164DAN Tool Holder 95° Lead Angle WNMG 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNL854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PCFNL16CA-12 Cartridge 90° Lead Angle CN 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCFNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

PSKNR16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

DNMG 431 CHIP BREAKER FC GRADE TN15 / DNMG 150404 FC TN15

$13.90 $15.44

DNMG 431 CHIP BREAKER FC GRADE TN15 / DNMG 150404 FC TN15 Canela Turning Insert [10 inserts per box]

S20U-MTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DVJNL163DAN Tool Holder 93° Lead Angle VN 33 Insert

$196.57

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PCLNR20CA-12 Cartridge 95° Lead Angle CN 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCLNR20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

DWLNL164DN Tool Holder 95° Lead Angle WNMG 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DWLNR164DN Tool Holder 95° Lead Angle WNMG 43 Insert

$82.22

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DWLNL244EAN Tool Holder 95° Lead Angle WNMG 43 Insert

$162.27

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MCLNL12CA-4C Cartridge 95° Lead Angle CN 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MDJNR164D Tool Holder 93° Lead Angle DN 43 Insert

$117.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MWLNL244E Tool Holder 95° Lead Angle WNMG 43 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$382.14

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNL204D Tool Holder 93° Lead Angle VN 43 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR204D Tool Holder 93° Lead Angle VN 43 Insert

$136.80

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DWLNL124BN Tool Holder 95° Lead Angle WNMG 43 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNL 16-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$86.53 $140.18

MTJNL 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes...

DWLNL244EN Tool Holder 95° Lead Angle WNMG 43 Insert

$106.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL103B Tool Holder 93° Lead Angle DN 33 Insert

$107.07

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S20U-DDUNL4N Boring Bar 93° Lead Angle DN 43 Insert

$286.45

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

MTANL205D Tool Holder 90° Lead Angle TNM 54 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVTNL 16-3D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$135.62 $219.70

MVTNL 16-3D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

S40V-MVUNL4 Boring Bar 93° Lead Angle VN 43 Insert

$442.99

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

TNGA333 Ceramic Turning Insert, Triangular Negative, 0.047" Radius, Grade CC7

$15.33

Canela reference TNGA333 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: TNGA333 Insert shape: Triangular negative insert Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius (r): 0.047" Grade: CC7 Brand: Canela Grade CC7. Hard materials (H),...

DNMG 442 Turning Insert, MC Chipbreaker, 0.031" Corner Radius, Grade TN30

$15.26

Canela reference DNMG442MC — 55° rhombic turning insert, grade TN30. Original Canela indexable insert, 0.610" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: DNMG442MC Insert shape: 55° rhombic (D) Clearance angle: 0° Chipbreaker: MC Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500"...

DNMG 442 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN30

$15.26

Canela reference DNMG442MHC — 55° rhombic turning insert, grade TN30. Original Canela indexable insert, 0.610" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: DNMG442MHC Insert shape: 55° rhombic (D) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500"...

PSKNR12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

DDJNR204DAN Tool Holder 93° Lead Angle DN 43 Insert

$207.41

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DNMA 442 Turning Insert, 0.031" Corner Radius, Grade TK15

$13.88

Canela reference DNMA442 — 55° rhombic turning insert, grade TK15. Original Canela indexable insert, 0.610" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: DNMA442 Insert shape: 55° rhombic (D) Clearance angle: 0° Cutting edge length (l): 0.610" Thickness (T): 0.250" Inscribed circle (d): 0.500" Corner radius...

S16T-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...