Search results

MTGNR854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

WNMG 332 CHIP BREAKER MC GRADE TN35 / WNMG 060408 MC TN35

$9.36 per insert$93.60 per box of 10

Canela reference WNMG332-MC — 80° trigon (W) turning insert, grade TN35. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: WNMG332-MC ISO designation: WNMG 060408 Insert shape: 80° trigon (W) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8"...

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNR164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MCGNR 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$76.46 each

MCGNR 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MTGNR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DTGNR163DN Tool Holder 90° Lead Angle TNM 33 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DNMA 150412 Grade FM524 / DNMA 433 #FMCarbide

$6.40 per insert$64.00 per box of 10

DNMA 150412 / DNMA 433, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): DNMA 150412 Insert...

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN20

$9.62 per insert$96.20 per box of 10

Canela reference SNMG432MHC — square turning insert, grade TN20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.031" Grade: TN20...

DNMG 150412 Chip Breaker BM Grade FM524 / DNMG 433 BM #FMCarbide

$6.40 per insert$64.00 per box of 10

DNMG 150412 / DNMG 433, chip breaker BM, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO):...

WNMG 332 CHIP BREAKER MC GRADE TN15 / WNMG 060408 MC TN15

$9.36 per insert$93.60 per box of 10

Canela reference WNMG332-MC — 80° trigon (W) turning insert, grade TN15. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Specifications Reference: WNMG332-MC ISO designation: WNMG 060408 Insert shape: 80° trigon (W) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 3/8"...

DNMA 150412 Grade FM2533 / DNMA 433 #FMCarbide

$7.05 per insert$70.50 per box of 10

DNMA 150412 / DNMA 433, grade FM2533 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): DNMA 150412 Insert designation (inch):...

MTJNR S20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 each

Right Hand Tool Holder MTJN R S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 20-4D Shank height (A):...

CNMG 120412 Chip Breaker BM Grade FM524 / CNMG 433 BM #FMCarbide

$5.24 per insert$52.40 per box of 10

CNMG 120412 / CNMG 433, chip breaker BM, grade FM524 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO):...

WNMA 080412 Chip Breaker BC Grade FM524 / WNMA 433 BC #FMCarbide

$5.24 per insert$52.40 per box of 10

WNMA 080412 / WNMA 433, chip breaker BC, grade FM524 — negative 80° trigon turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade...

DTJNL123BAN Tool Holder 93° Lead Angle TNM 33 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DTGNR123BN Tool Holder 90° Lead Angle TNM 33 Insert

$76.88 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CNMG 120412 Chip Breaker BC Grade FM2543 / CNMG 433 BC #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMG 120412 / CNMG 433, chip breaker BC, grade FM2543 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade...

CNMA 120412 Chip Breaker BC Grade FM524 / CNMA 433 BC #FMCarbide

$8.32 per insert$83.20 per box of 10

CNMA 120412 / CNMA 433, chip breaker BC, grade FM524 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade...

SNMG 120412 Chip Breaker BC Grade FM2543 / SNMG 433 BC #FMCarbide

$5.78 per insert$57.80 per box of 10

SNMG 120412 / SNMG 433, chip breaker BC, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

MTANR123B Tool Holder 90° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL123B Tool Holder 75° Lead Angle TNM 33 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

CNMG 120412 Chip Breaker BM Grade FM2543 / CNMG 433 BM #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMG 120412 / CNMG 433, chip breaker BM, grade FM2543 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2543 is a CVD grade — first-choice grade for general steel work — continuous through interrupted cuts across steel applications.Specifications Insert designation (ISO): CNMG 120412 Insert designation...

DTGNL123BN Tool Holder 90° Lead Angle TNM 33 Insert

$76.88 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMA 120412 Grade FM2533 / SNMA 433 #FMCarbide

$5.78 per insert$57.80 per box of 10

SNMA 120412 / SNMA 433, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 120412 Insert designation (inch): SNMA...

S24U-WTFNL3 Boring Bar 90° Lead Angle TNM 33 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S24U-MTFNR3 Boring Bar 90° Lead Angle TNM 33 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

CNMG 120412 Chip Breaker BM Grade FM2553 / CNMG 433 BM #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMG 120412 / CNMG 433, chip breaker BM, grade FM2553 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2553 is a CVD (Al₂O₃) grade — tough substrate for heavy interrupted cuts in steel and stainless, heavy roughing in mild steel, and first choice for superalloys.Specifications...

0012 Grooved Pin — 0.196" dia. x 0.590" long

$1.64 each

Canela reference 0012 — grooved pin. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 0012 Part type: Grooved Pin Dimension a: 0.590" Dimension b: 0.196" Brand: Canela Dimensions in inches, as published in the Canela spare-parts catalog, section “Levers and others”, page...

WNMA 080412 Grade FM2533 / WNMA 433 #FMCarbide

$5.78 per insert$57.80 per box of 10

WNMA 080412 / WNMA 433, grade FM2533 — negative 80° trigon turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): WNMA 080412 Insert designation (inch):...

CNMA 160612 Chip Breaker BC Grade FM524 / CNMA 433 BC #FMCarbide

$14.68 per insert$146.80 per box of 10

CNMA 160612 Chip Breaker BC Grade FM524 / CNMA 433 BC #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained Selection help: FM Carbide Chip Breaker Legend & Grade Selection Chart → Availability and Shipping FM Carbide maintains stock in...

MVTNR 85-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$141.36 each

MVTNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

WCMX 080412 Grade FM125 / 433 Multi-Material Drill Insert

$9.80 per insert$98.00 per box of 10

WCMX 080412, grade FM125 — positive 80° trigon drilling insert.80° trigon indexable insert, ISO designation WCMX 080412. FM125 is a PVD grade — multi-purpose milling and drilling grade — PVD coating with thermal resistance and a tough substrate.Specifications Insert designation (ISO): WCMX 080412 Insert shape: 80° trigon (W) Clearance angle:...

TAR 86-4 Indexable Turning Tool Holder, 1" Square Shank, 1/2" I.C. Insert

$157.83 each

TAR 86-4 — toolholder, 1" × 1-1/2" rectangular shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every...

CNMA 120412 Grade FM2533 / CNMA 433 #FMCarbide

$5.78 per insert$57.80 per box of 10

CNMA 120412 / CNMA 433, grade FM2533 — negative 80° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): CNMA 120412 Insert designation (inch):...

SIMDPNR 24-4 Indexable Boring Bar for CNC Turning

$437.07 each

SIMDPNR 24-4 — boring bar, 1.50" bar diameter, 2.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -27.5° End Cutting Edge Angle for Negative 55° Diamond. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

H16 MTFNR 3 Interchangeable Head for CNC Turning

$375.00 each

H16 MTFNR 3 — interchangeable head, 1.000" head diameter, 1.220" minimum bore. Made in the USA by RMC Tooling. H-MTFNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

3416 Triangular Shim Seat — 0.468"

$8.81 each

Canela reference 3416 — triangular shim seat. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 3416 Part type: Triangular Shim Seat Dimension a: 0.192" Dimension b: 0.108" Dimension c: 0.532" Dimension d: 0.468" Brand: Canela Dimensions in inches, as published in the...

S24 MWLNL 4 Indexable Boring Bar for CNC Turning

$317.30 each

S24 MWLNL 4 — boring bar, 1.50" bar diameter, 1.780" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

WNMG 080404 Chip Breaker BG Grade FM2533 / WNMG 431 BG #FMCarbide

$5.78 per insert$57.80 per box of 10

WNMG 080404 / WNMG 431, chip breaker BG, grade FM2533 — negative 80° trigon turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade — stable steel...

S20 MWLNL 4 Indexable Boring Bar for CNC Turning

$288.44 each

S20 MWLNL 4 — boring bar, 1.25" bar diameter, 1.530" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for Negative Trigon WNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

CNMG 160612 Chip Breaker BR Grade FM2553 / CNMG 543 BR #FMCarbide

$15.23 per insert$152.30 per box of 10

CNMG 160612 / CNMG 543, chip breaker BR, grade FM2553 — negative 80° rhombic turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

S28 MDUNL 4 Indexable Boring Bar for CNC Turning

$375.00 each

S28 MDUNL 4 — boring bar, 1.75" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

MDJNR 12-4C Indexable Turning Tool Holder, 3/4" Square Shank, 1/2" I.C. 55° Diamond Insert, Right Hand

$124.05 each

MDJNR 12-4C — toolholder, 3/4" square shank, 5.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

MWLNR 24-4D Indexable Turning Tool Holder, 1-1/2" Square Shank, 1/2" I.C. Insert, Right Hand

$115.41 each

MWLNR 24-4D — toolholder, 1-1/2" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

H32 MWLNR 4 Interchangeable Head for CNC Turning

$464.43 each

H32 MWLNR 4 — interchangeable head, 2.000" head diameter, 2.400" minimum bore. Made in the USA by RMC Tooling. H-MWLNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

11 mm OD x 11 mm Shank OD x 73 mm LOC x 114 mm OAL 2-Flute Solid Carbide Jobber-Length Drill 118° Point Bright Finish (Uncoated)

$49.27 each

11 mm OD x 11 mm Shank OD x 73 mm LOC x 114 mm OAL 2-Flute Solid Carbide Jobber-Length Drill 118° Point Bright Finish (Uncoated).This solid carbide jobber-length drill is designed for precise, rigid holemaking with consistent dimensions and dependable tool life. Its geometry and finish are matched to...

A28U-MTFN R 4 - 90° Side & End Cutting Edge Angle

$363.41 each

Right Hand Boring Bar A28U-MTFN 4 - 90° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 4" Internal turning and profiling boring bar equipped with triangular negative double-sided insert. Specifications Model: A28U-MTFNR4 Bar diameter (D): 1.750" Minimum bore (A): 2.030" Overall length (L1): 14.00" Head...

H28 MCLNR 4W Interchangeable Head for CNC Turning

$415.41 each

H28 MCLNR 4W — interchangeable head, 1.750" head diameter, 2.010" minimum bore. Made in the USA by RMC Tooling. H-MCLNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MVVNN 20-4E Indexable Turning Tool Holder, 1-1/4" Square Shank, 1/2" I.C. 35° Diamond Insert, Neutral

$144.25 each

MVVNN 20-4E — toolholder, 1-1/4" square shank, 7.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...