Search results for "SNM 32"

MSDNN103B Tool Holder 45° Lead Angle SNM 32 Insert

$64.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN083A Tool Holder 45° Lead Angle SNM 32 Insert

$61.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMSKNL 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNL 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMSKNR 32-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNR 32-6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSRNL 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$193.58 $241.98

MSRNL 32-8E — toolholder, 2.000" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 $607.50

SIMSKNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSRNR 32-8E Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$193.58 $241.98

MSRNR 32-8E — toolholder, 2.000" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 $607.50

SIMSKNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSKNR 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$72.83 $117.98

MSKNR 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S32 MSKNR 6 Indexable Boring Bar for CNC Turning

$375.00 $607.50

S32 MSKNR 6 — boring bar, 2.00" bar diameter, 2.400" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMTJNR 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S32V-MSKNR6 Boring Bar 75° Lead Angle SNM 64 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTJNR 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNR 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S32V-MSKNL6 Boring Bar 75° Lead Angle SNM 64 Insert

$336.39

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

SIMTFNR 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SI-MSKNL 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$448.89 $561.11

SI-MSKNL 36-6 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMTJNL 32-4 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTJNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SI-MSKNR 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$448.89 $561.11

SI-MSKNR 36-6 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S32 MSSNR 5 Indexable Boring Bar for CNC Turning

$432.70 $700.98

S32 MSSNR 5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

4-Flute SE 30°H NC MED HSS (CN = TiCN-PG) - 1 X 1 X 3 X 5-1/2

$56.11

($56.11 / item)

4-Flute SE 30°H NC MED HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 3 X 5-1/2 Item: SFM-32CN

S32 MTUNR 4 Indexable Boring Bar for CNC Turning

$375.00 $607.50

S32 MTUNR 4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMCLNR 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNR 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SI-MTJNL 32-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$314.57 $393.21

SI-MTJNL 32-5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

S32 MWLNR 4 Indexable Boring Bar for CNC Turning

$360.60 $584.18

S32 MWLNR 4 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S32 MTFNR 4 Indexable Boring Bar for CNC Turning

$375.00 $607.50

S32 MTFNR 4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMCLNL 32-4 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S32 MDQNR 4 Indexable Boring Bar for CNC Turning

$473.47 $767.02

S32 MDQNR 4 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S32 MCLNR 6 Indexable Boring Bar for CNC Turning

$360.60 $584.18

S32 MCLNR 6 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard...

SIMVJNR 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$403.86 $654.26

SIMVJNR 32-4 — boring bar, 2.00" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

H32 DSSNR 6W Interchangeable Head for CNC Turning

$464.43 $752.38

H32 DSSNR 6W — interchangeable head, 2.000" head diameter, 2.500" minimum bore. Made in the USA by RMC Tooling. H-DSSNR Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

S32 MDJNR 4 Indexable Boring Bar for CNC Turning

$403.86 $654.26

S32 MDJNR 4 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

SIMSKNR 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$288.44 $467.28

SIMSKNR 20-4 — boring bar, 1.25" bar diameter, 1.470" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

2-Flute DE 30°H CC REG STR-FL HSS (CN = TiCN-PG) - 1 X 1 X 1-5/8 X 5-7/8

$116.56

($116.56 / item)

2-Flute DE 30°H CC REG STR-FL HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 1-5/8 X 5-7/8 Item: SBB-32CN

S32 MTFNR 5 Indexable Boring Bar for CNC Turning

$375.00 $607.50

S32 MTFNR 5 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S32 MWLNL 4 Indexable Boring Bar for CNC Turning

$360.60 $584.18

S32 MWLNL 4 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

SIMSKNR 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$346.17 $560.80

SIMSKNR 28-4 — boring bar, 1.75" bar diameter, 2.010" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S32 MDQNL 4 Indexable Boring Bar for CNC Turning

$473.47 $767.02

S32 MDQNL 4 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S32 NER 3 Indexable Boring Bar for CNC Turning

$432.70 $700.98

S32 NER 3 — boring bar, 2" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

H32 MSSNR 4 Interchangeable Head for CNC Turning

$482.70 $781.98

H32 MSSNR 4 — interchangeable head, 2" head diameter. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting...

H32 MSKNR 6W Interchangeable Head for CNC Turning

$390.38 $632.42

H32 MSKNR 6W — interchangeable head, 2" head diameter. Made in the USA by RMC Tooling. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and you only buy the cutting...

SIMTFNL 32-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$375.00 $607.50

SIMTFNL 32-4 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

4-Flute SE 30°H NC X-LONG HSS (CN = TiCN-PG) - 1 X 1 X 6 X 8-1/2

$76.00

($76.00 / item)

4-Flute SE 30°H NC X-LONG HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 6 X 8-1/2 Item: SFX-32CN

SIMCLNR 32-6 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNR 32-6 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SIMCLNR 32-5 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$360.60 $584.18

SIMCLNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

4-Flute SE 30°H NC REG RHC/LHS HSS (CN = TiCN-PG) - 1 X 1 X 2 X 4-1/2

$68.86

($68.86 / item)

4-Flute SE 30°H NC REG RHC/LHS HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 2 X 4-1/2 Item: SSL-32CN

3-Flute SE 30°H BN REG HSS (CN = TiCN-PG) - 1 X 7/8 X 1-7/8 X 4-1/8

$65.42

($65.42 / item)

3-Flute SE 30°H BN REG HSS (CN = TiCN-PG) Dimensions: 1 X 7/8 X 1-7/8 X 4-1/8 Item: SER-32CN

3-Flute SE 30°H BN REG HSS (CN = TiCN-PG) - 1 X 1 X 2 X 4-1/2

$65.42

($65.42 / item)

3-Flute SE 30°H BN REG HSS (CN = TiCN-PG) Dimensions: 1 X 1 X 2 X 4-1/2 Item: SER-32YCN

2-Flute SE 30°H BN REG HSS (CN = TiCN-PG) - 1 X 3/4 X 2-1/4 X 4-1/2

$62.52

($62.52 / item)

2-Flute SE 30°H BN REG HSS (CN = TiCN-PG) Dimensions: 1 X 3/4 X 2-1/4 X 4-1/2 Item: SR-32XCN

S32 MVUNR 4 Indexable Boring Bar for CNC Turning

$403.86 $654.26

S32 MVUNR 4 — boring bar, 2.00" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

6-Flute SE 30°H NC LONG BRIDGEPORT HSS (CN = TiCN-PG) - 1 X 3/4 X 1-1/2 X 3-3/4

$59.09

($59.09 / item)

6-Flute SE 30°H NC LONG BRIDGEPORT HSS (CN = TiCN-PG) Dimensions: 1 X 3/4 X 1-1/2 X 3-3/4 Item: STFM-32CN