Search results

DSRNR205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN205DAN Tool Holder 45° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN855D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MSKNR5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSRNL205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MSKNL5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSKNL205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSRNR20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSKNR25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

MSRNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSTNR20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSSNL20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

PSKNL25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

MSKNR20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSYNR20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSTNL20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSYNL20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSKNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSC50-DSDNN00060-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-DSDNN00060-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSDNN00060-15 Coupling: PSC...

PSC50-PSDNN00060-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-PSDNN00060-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSDNN00060-15 Coupling: PSC...

SNMA150612 Grade FM524 / SNMA 543 #FMCarbide

$7.88 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM524 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation...

PSC63-DSDNN00065-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00065-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00065-15 Coupling: PSC...

SNMG 543 Turning Insert, RC Chipbreaker, 0.047" Corner Radius, Grade TN30

$16.68 each

10 inserts per box

Canela reference SNMG543RC — square turning insert, grade TN30. Original Canela indexable insert, 0.625" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG543RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.625" Thickness (T): 0.250" Inscribed circle (d): 0.625" Corner radius...

PSC50-DSRNL27060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSRNL27060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNL27060-15 Coupling: PSC 50 (ISO...

PSC50-DSSNL35050-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSSNL35050-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSSNL35050-15 Coupling: PSC...

PSC50-DSSNR35050-15 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSSNR35050-15 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSSNR35050-15 Coupling: PSC...

PSC50-PSRNL27060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-PSRNL27060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSRNL27060-15 Coupling: PSC 50 (ISO...

PSC63-PSSNL45054-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-PSSNL45054-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSSNL45054-15 Coupling: PSC...

PSC50-DSKNL35060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSKNL35060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSKNL35060-15 Coupling: PSC 50 (ISO...

PSC40-PSDNN00050-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$265.55 each

Canela reference PSC40-PSDNN00050-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC40-PSDNN00050-15 Coupling: PSC...

PSC50-DSRNR27060-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSRNR27060-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNR27060-15 Coupling: PSC 50 (ISO...

SNMA 150612 Grade FM2533 / SNMA 543 #FMCarbide

$12.33 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM2533 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation (inch): SNMA...

PSC63-DSSNL45054-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSSNL45054-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSSNL45054-15 Coupling: PSC...

PSC63-PSDNN00065-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-PSDNN00065-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSDNN00065-15 Coupling: PSC...