Search results

MSKNR246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR246EN Tool Holder 45° Lead Angle SNM 64 Insert

$121.08 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MSKNL6 Boring Bar 75° Lead Angle SNM 64 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSDNN206D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL206DAN Tool Holder 75° Lead Angle SNM 64 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL246EN Tool Holder 45° Lead Angle SNM 64 Insert

$121.08 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN166D Tool Holder 45° Lead Angle SNM 64 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN856D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR206D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL206D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL206DN Tool Holder 45° Lead Angle SNM 64 Insert

$103.35 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MSKNR6 Boring Bar 75° Lead Angle SNM 64 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DSRNR206DAN Tool Holder 75° Lead Angle SNM 64 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S40V-MSKNL6 Boring Bar 75° Lead Angle SNM 64 Insert

$402.89 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S32V-MSKNR6 Boring Bar 75° Lead Angle SNM 64 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSSNL866E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN206DAN Tool Holder 45° Lead Angle SNM 64 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR866E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN246EAN Tool Holder 45° Lead Angle SNM 64 Insert

$185.57 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR206DN Tool Holder 45° Lead Angle SNM 64 Insert

$103.35 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-PSDNN00065-19 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-PSDNN00065-19 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSDNN00065-19 Coupling: PSC...

PSC63-DSRNL35065-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSRNL35065-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSRNL35065-19 Coupling: PSC 63 (ISO...

PSC63-PSKNL45065-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-PSKNL45065-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSKNL45065-19 Coupling: PSC 63 (ISO...

PSC63-DSDNN00070-19 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00070-19 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00070-19 Coupling: PSC...

PSC50-DSRNR27060-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSRNR27060-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNR27060-19 Coupling: PSC 50 (ISO...

PSC63-DSRNR35065-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-DSRNR35065-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSRNR35065-19 Coupling: PSC 63 (ISO...

SNMG 644 Turning Insert, RC Chipbreaker, 0.063" Corner Radius, Grade TN30

$22.15 each

10 inserts per box

Canela reference SNMG644RC — square turning insert, grade TN30. Original Canela indexable insert, 0.750" cutting edge and 0.063" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG644RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.750" Thickness (T): 0.250" Inscribed circle (d): 0.750" Corner radius...

PSC80-DSRNR45080-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-DSRNR45080-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-DSRNR45080-19 Coupling: PSC 80 (ISO...

PSC80-PSRNR45080-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-PSRNR45080-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSRNR45080-19 Coupling: PSC 80 (ISO...

PSC63-DSSNL45052-19 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSSNL45052-19 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSSNL45052-19 Coupling: PSC...

PSC63-DSKNL45065-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSKNL45065-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSKNL45065-19 Coupling: PSC 63 (ISO...

PSC63-PSRNL35065-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-PSRNL35065-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSRNL35065-19 Coupling: PSC 63 (ISO...

PSC80-PSRNL45080-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$367.75 each

Canela reference PSC80-PSRNL45080-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-PSRNL45080-19 Coupling: PSC 80 (ISO...

PSC63-PSRNR35065-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-PSRNR35065-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSRNR35065-19 Coupling: PSC 63 (ISO...

SNMA 190616 Grade FM524 / SNMA 644 #FMCarbide

$10.22 each

10 inserts per box

SNMA 190616 / SNMA 644, grade FM524 — negative square turning insert.3/4" inscribed circle, 1/4" thick, 1/16" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): SNMA 190616 Insert designation...

PSC63-DSKNR45065-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-DSKNR45065-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSKNR45065-19 Coupling: PSC 63 (ISO...

PSC80-DSKNR55080-19 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$367.75 each

Canela reference PSC80-DSKNR55080-19 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC80-DSKNR55080-19 Coupling: PSC 80 (ISO...

PSC50-DSDNN00065-19 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-DSDNN00065-19 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSDNN00065-19 Coupling: PSC...

PSC50-PSRNL27060-19 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-PSRNL27060-19 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSRNL27060-19 Coupling: PSC 50 (ISO...

PSC63-PSSNR45052-19 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-PSSNR45052-19 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSSNR45052-19 Coupling: PSC...