Search results

DNMG 432 CHIP BREAKER MHC GRADE TN20 / DNMG 150408 MHC TN20

$13.90 each

10 inserts per box

Canela reference DNMG432-MHC — 55° rhombic (D) turning insert, grade TN20. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: DNMG432-MHC ISO designation: DNMG 150408 Insert shape: 55° rhombic (D) Clearance angle: 0° — negative (N) Chipbreaker: MHC Thickness (T): 3/16" (4.76 mm)...

DNMG 432 CHIP BREAKER MC GRADE TN35 / DNMG 150408 MC TN35

$13.90 each

10 inserts per box

Canela reference DNMG432-MC — 55° rhombic (D) turning insert, grade TN35. Original Canela indexable insert and 1/32" (0.79 mm) corner radius. Sold individually, no minimum order.Specifications Reference: DNMG432-MC ISO designation: DNMG 150408 Insert shape: 55° rhombic (D) Clearance angle: 0° — negative (N) Chipbreaker: MC Thickness (T): 3/16" (4.76 mm)...

DNMG 150408 Chip Breaker BG Grade FM2533 / DNMG 432 BG #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BG, grade FM2533 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade — stable steel...

DNMG 150408 Chip Breaker BG Grade FM2553 / DNMG 432 BG #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BG, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough...

DNMG 150408 Chip Breaker BG Grade FM524 / DNMG 432 BG #FMCarbide

$6.40 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BG, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade — gray cast...

DNMG 150408 Chip Breaker BC Grade FM2553 / DNMG 432 BC #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BC, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃)...

DNMG 150408 Chip Breaker BC Grade FM2543 / DNMG 432 BC #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BC, grade FM2543 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade...

DNMG 150408 Chip Breaker BL Grade FM2553 / DNMG 432 BL #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BL, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

DNMG 150408 Chip Breaker BMR Grade FM2553 / DNMG 432 BMR #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BMR, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BMR breaker is the roughing geometry: 0.012–0.022 ipr (0.3–0.6 mm/rev) at 0.07–0.22" (1.8–5.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

DNMG 150408 Chip Breaker BC Grade FM524 / DNMG 432 BC #FMCarbide

$6.40 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BC, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade...

DNMG 150408 Chip Breaker BR Grade FM2553 / DNMG 432 BR #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BR, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

DNMG 150408 Chip Breaker BR Grade FM2533 / DNMG 432 BR #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BR, grade FM2533 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2533 is a CVD grade — stable steel applications...

DNMG 150408 Chip Breaker BR Grade FM524 / DNMG 432 BR #FMCarbide

$6.40 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BR, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM524 is a CVD grade — gray cast iron...

DNMG 150408 Chip Breaker BC Grade FM2533 / DNMG 432 BC #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BC, grade FM2533 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade...

DNMG 150408 Chip Breaker BMF Grade FM2553 / DNMG 432 BMF #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BMF, grade FM2553 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BMF breaker is the finishing geometry: 0.003–0.012 ipr (0.07–0.3 mm/rev) at 0.01–0.06" (0.2–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

DNMG 150408 Chip Breaker BR Grade FM2543 / DNMG 432 BR #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BR, grade FM2543 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

DNMG 150408 Chip Breaker BL Grade FM2543 / DNMG 432 BL #FMCarbide

$9.68 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BL, grade FM2543 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

DNMG 150408 Chip Breaker BL Grade FM2533 / DNMG 432 BL #FMCarbide

$7.05 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BL, grade FM2533 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM2533 is a CVD grade — stable steel applications...

DNMG 150408 Chip Breaker BL Grade FM524 / DNMG 432 BL #FMCarbide

$6.40 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BL, grade FM524 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BL breaker is the semi-finishing geometry: 0.004–0.012 ipr (0.1–0.3 mm/rev) at 0.04–0.12" (1–3 mm) depth of cut. FM524 is a CVD grade — gray cast iron...

DNMG 150408 Chip Breaker BG Grade FM2543 / DNMG 432 BG #FMCarbide

$9.16 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BG, grade FM2543 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade — first-choice grade...

DNMG 150408 Chip Breaker BG Grade FM324 / DNMG 432 BG #FMCarbide

$10.20 each

10 inserts per box

DNMG 150408 / DNMG 432, chip breaker BG, grade FM324 — negative 55° rhombic turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose...

H32 MDUNL 4 Interchangeable Head for CNC Turning

$499.02 each

H32 MDUNL 4 — interchangeable head, 2.000" head diameter, 2.500" minimum bore. Made in the USA by RMC Tooling. H-MDUNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

SIMDUNR 32-4 Indexable Boring Bar for CNC Turning

$403.86 each

SIMDUNR 32-4 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

RMC Insert Shims — Models B SSQ-16-3 to ISSN-623

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

MDGNL 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$108.87 each

MDGNL 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MDPNN 85-4D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$153.25 each

MDPNN 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 27.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MDGNL 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$93.37 each

MDGNL 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MDGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$93.37 each

MDGNR 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MDGNR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$108.87 each

MDGNR 16-4D — toolholder, 1.00" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

H32 DDUNR 4W Interchangeable Head for CNC Turning

$499.02 each

H32 DDUNR 4W — interchangeable head, 2.000" head diameter, 2.500" minimum bore. Made in the USA by RMC Tooling. H-DDUNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MDJNR 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts

$135.62 each

MDJNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

H32 DDUNL 4W Interchangeable Head for CNC Turning

$499.02 each

H32 DDUNL 4W — interchangeable head, 2.000" head diameter, 2.500" minimum bore. Made in the USA by RMC Tooling. H-DDUNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMDQNR 24-4 Indexable Boring Bar for CNC Turning

$420.69 each

SIMDQNR 24-4 — boring bar, 1.50" bar diameter, 2.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -17.5° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNR 32-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$403.86 each

SIMDJNR 32-4 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

MDQNR 24-4D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$160.30 each

MDQNR 24-4D — toolholder, 1.50" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 17.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SIMDJNR 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$375.00 each

SIMDJNR 28-4 — boring bar, 1.75" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

RMC Insert Shims — Models ISSN-632 to MTN-334

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders. The shim protects the holder pocket from insert breakage — replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG and more —...

SIMDJNL 32-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$403.86 each

SIMDJNL 32-4 — boring bar, 2.00" bar diameter, 3.000" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNL 16-4 Indexable Boring Bar for CNC Turning

$303.56 each

SIMDJNL 16-4 — boring bar, 1" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at...

MDQNL 24-4D Tool Holder 17.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$160.30 each

MDQNL 24-4D — toolholder, 1.50" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 17.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

H36 DDUNR 4W Interchangeable Head for CNC Turning

$522.15 each

H36 DDUNR 4W — interchangeable head, 2.250" head diameter, 2.745" minimum bore. Made in the USA by RMC Tooling. H-DDUNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMDJNR 20-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$317.30 each

SIMDJNR 20-4 — boring bar, 1.25" bar diameter, 2.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNL 24-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$346.17 each

SIMDJNL 24-4 — boring bar, 1.50" bar diameter, 2.250" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNR 24-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$346.17 each

SIMDJNR 24-4 — boring bar, 1.50" bar diameter, 2.250" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNL 28-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$375.00 each

SIMDJNL 28-4 — boring bar, 1.75" bar diameter, 2.500" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SIMDJNL 20-4 -3° Side & End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts

$317.30 each

SIMDJNL 20-4 — boring bar, 1.25" bar diameter, 2.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

PSC63-DDJNR45065-15 PSC Modular Toolholder, 93° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-DDJNR45065-15 — PSC modular toolholder, right hand. Turning and profiling toolholder equipped with rhombic negative double-sided insert (angle 55º). PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DDJNR45065-15 Coupling: PSC...

H40 DDUNR 4W Interchangeable Head for CNC Turning

$533.65 each

H40 DDUNR 4W — interchangeable head, 2.500" head diameter, 3.125" minimum bore. Made in the USA by RMC Tooling. H-DDUNR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...