Search results for "rc 12"

SRSCR124B Tool Holder RC 12 Insert

$84.77

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRSCL124B Tool Holder RC 12 Insert

$84.77

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRDCN164D Tool Holder RC 12 Insert

$100.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRSCL164D Tool Holder RC 12 Insert

$100.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCR204D Tool Holder RC 12 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRDCN204D Tool Holder RC 12 Insert

$115.43

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCR854D Tool Holder RC 12 Insert

$111.33

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCL204D Tool Holder RC 12 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCR164D Tool Holder RC 12 Insert

$100.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRSCR204D Tool Holder RC 12 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRSCR164D Tool Holder RC 12 Insert

$100.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRSCL204D Tool Holder RC 12 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCL164D Tool Holder RC 12 Insert

$100.95

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SRGCL854D Tool Holder RC 12 Insert

$111.33

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RAR 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

RAR 12-3 — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SIMCLNR 12-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$259.63 $420.60

SIMCLNR 12-3 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

MRGNR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MCLNR 12-3B Tool Holder -5 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$76.46 $123.86

MCLNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. -5° End or Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

S12 STFCR 2 Indexable Boring Bar for CNC Turning

$170.00 $275.40

S12 STFCR 2 — boring bar, 0.750" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for 7° Positive Triangle TC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

MCRNR 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$64.12 $80.15

MCRNR 12-3B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SRDCN123B Tool Holder RC 10 Insert

$84.77

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

STJCR 12-3B Indexable Tool Holder for CNC Turning

$77.90 $126.20

STJCR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for 7° Positive Triangle TCMT Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

SI-MCLNL 12-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

$259.63 $420.60

SI-MCLNL 12-3 — boring bar, 0.75" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S12 SVUCR 2 Indexable Boring Bar for CNC Turning

$318.27 $515.60

S12 SVUCR 2 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive 35° Diamond VC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S12 SDUCR 3 Indexable Boring Bar for CNC Turning

$206.41 $334.38

S12 SDUCR 3 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive 55°Diamond DC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

S12 SCLCR 3 Indexable Boring Bar for CNC Turning

$147.21 $238.48

S12 SCLCR 3 — boring bar, 0.750" bar diameter, 0.954" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard...

RAL 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

RAL 12-3 — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SDR 12-3 Indexable Tool Holder for CNC Turning

$75.04 $121.56

SDR 12-3 — toolholder, 3/4" square shank. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location every time it...

S12 STUCR 3 Indexable Boring Bar for CNC Turning

$165.11 $267.48

S12 STUCR 3 — boring bar, 0.750" bar diameter, 0.954" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive Triangle TC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

S12 STUCL 3 Indexable Boring Bar for CNC Turning

$165.11 $267.48

S12 STUCL 3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

MRGNL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S12 SCLCL 3 Indexable Boring Bar for CNC Turning

$147.21 $238.48

S12 SCLCL 3 — boring bar, 0.750" bar diameter, 0.954" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard...

S12 MVJNR 3 Indexable Boring Bar for CNC Turning

$352.10 $570.40

S12 MVJNR 3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

S12 SDUCL 3 Indexable Boring Bar for CNC Turning

$206.41 $334.38

S12 SDUCL 3 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive 55°Diamond DC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

MCRNL 12-3B Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$64.12 $80.15

MCRNL 12-3B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

MRGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$75.04 $121.56

MRGNR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

S12 CTFPR 3 Indexable Boring Bar for CNC Turning

$256.40 $415.36

S12 CTFPR 3 — boring bar, 0.750" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Positive Triangle TPG Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SCLCR12CA-12 Cartridge 95° Lead Angle CC 43 Insert

$184.03

Multipurpose toolholder equipped with rhombic positive insert (angle 80º). Specifications Model: SCLCR12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 0.984" Width (b): 0.551" Dimension h: 0.630" Dimension h1: 0.472" Dimension f: 0.787" Insert: CC..43.. Weight: 0.132 lb Brand: Canela Dimensions and weight as published in the Canela catalog. Dimension...

SISCLCR 12-3 Indexable Boring Bar for CNC Turning

$147.21 $238.48

SISCLCR 12-3 — boring bar, 0.750" bar diameter, 0.954" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

S12 STFCL 2 Indexable Boring Bar for CNC Turning

$170.00 $275.40

S12 STFCL 2 — boring bar, 0.750" bar diameter, 1.000" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for 7° Positive Triangle TC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry,...

MCGNR 12-4B Tool Holder 0 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$76.46 $123.86

MCGNR 12-4B — toolholder, 0.75" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

S12 NEL 2 Indexable Boring Bar for CNC Turning

$230.68 $373.70

S12 NEL 2 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. Internal Boring Bar for Threading & Grooving Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid...

S12 SVUCL 2 Indexable Boring Bar for CNC Turning

$223.95 $362.80

S12 SVUCL 2 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive 35° Diamond VC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

SINEL 12-3 Indexable Boring Bar for CNC Turning

$309.54 $501.46

SINEL 12-3 — boring bar. Made in the USA by RMC Tooling. Internal Boring Bar for Threading & Grooving Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination...

MDJNR 12-3B Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts

$124.05 $200.96

MDJNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the...

S12 MVUNR 3 Indexable Boring Bar for CNC Turning

$352.10 $570.40

S12 MVUNR 3 — boring bar, 3/4" bar diameter. Made in the USA by RMC Tooling. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down...

SISDUCR 12-3 Indexable Boring Bar for CNC Turning

$206.41 $334.38

SISDUCR 12-3 — boring bar, 0.750" bar diameter, 1.125" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for 7° Positive 55°Diamond DC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...

SISCLCL 12-3 Indexable Boring Bar for CNC Turning

$170.94 $276.92

SISCLCL 12-3 — boring bar, 0.750" bar diameter, 0.954" minimum bore, 10.0" overall length. Made in the USA by RMC Tooling. -5° End & Side Cutting Edge Angle for 7° Positive 80°Diamond CC_T Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable...

NSR 12-3A Indexable Tool Holder for CNC Turning

$92.32 $149.56

NSR 12-3A — toolholder, 3/4" square shank, 4.0" overall length. Made in the USA by RMC Tooling. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool goes back into the turret at the same cutting-point location...

SCFCR12CA-12 Cartridge 90° Lead Angle CC 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: SCFCR12CA-12 Dimension D: 1.575" Length (L): 1.850" Length (L1): 0.984" Width (b): 0.551" Dimension...