Search results for "snm 85"

MSRNR248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSDNN 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSRNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNR 85-4DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 $194.72

MSSNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNR 85-5DTool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSSNR 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSDNN 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNL 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 $194.72

MSSNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSRNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 85-6D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSDNN 85-6D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSSNL 85-5D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$93.28 $116.60

MSSNL 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$77.44 $96.80

MSKNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-6D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSRNL 85-6D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$95.20 $154.22

MSKNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNR 85-5D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSRNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSKNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSRNL 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSRNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNL 85-4D Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$92.32 $149.56

MSKNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 86-5E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSDNN 86-5E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MVVNN 85-4D Tool Holder 17.5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$138.47 $224.32

Neutral Hand Tool Holder MVVNN 85-4D - Made in the USA

MTJNL 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTJNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

MTGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTGNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTGNR 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTGNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MVJNR 85-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$153.89 $192.36

Right Hand Tool Holder MVJNR 85-4D - Made in the USA

MVLNL 85-3D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$163.52 $204.39

MVLNL 85-3D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MVJNL 85-4D Tool Holder -3 DEGREE Side Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$153.89 $192.36

Left Hand Tool Holder MVJNL 85-4D - Made in the USA

MCKNR 85-4D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCKNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MCKNR 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$95.20 $154.22

MCKNR 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MVTNR 85-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$141.36 $229.00

MVTNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MDPNN 85-5D Tool Holder 27.5 Side Cutting Edge Angle for Negative 55 Diamond DNM_Inserts

$135.57 $219.62

MDPNN 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 27.5° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MTRNR 85-5D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTRNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MVTNL 85-4D Tool Holder -27.50 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$116.14 $145.18

MVTNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -27.50° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MVLNR 85-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$147.14 $238.36

MVLNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MTANL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTANL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MRGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MCRNR 85-4D Tool Holder 15 Side Cutting Edge Angle for Negative 80 Diamond CNM_Inserts

$95.20 $154.22

MCRNR 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MRGNR 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MTFNL 85-4D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTFNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MDJNR 85-4D Tool Holder 3 Side Cutting Edge Angle for Negative 55 Diamond CNM_Inserts

$135.62 $219.70

MDJNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3° Side Cutting Edge Angle for Negative 55° Diamond DNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MTRNL 85-4D Tool Holder 15 DEGREE Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTRNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MCKNL 85-5D Tool Holder 15 End Cutting Edge Angle for Negative 80 Diamond CNM_ Inserts

$79.85 $99.81

MCKNL 85-5D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MTJNL 85-5D Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$113.43 $141.79

MTJNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...

SNMG 120408 Chip Breaker BG Grade FM2553 / SNMG 432 BG #FMCarbide

$8.21 $10.26

SNMG 120408 Chip Breaker BG Grade FM2553 / SNMG 432 BG #FMCarbide [10 inserts per box] Cutting parameters and speeds & feeds charts: Carbide End Mill Feeds and Speeds Explained

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 $10.84

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15 Canela Turning Insert [10 inserts per box]

MVLNL 85-4D Tool Holder -5 DEGREE End Cutting Edge Angle for Negative 35 DEGREE Diamond VNM_Inserts

$123.41 $154.26

MVLNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. -5° End Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified...

MRGNL 85-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNL 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSKNL 08-3A Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$72.83 $117.98

MSKNL 08-3A — toolholder, 0.500" square shank, 4.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSDNN 86-6E Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$102.61 $128.26

MSDNN 86-6E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

MSDNN 08-3B Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$69.25 $112.18

MSDNN 08-3B — toolholder, 0.500" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MTFNR 85-5D Tool Holder 0 End Cutting Edge Angle for Negative Triangle TNM_Inserts

$92.32 $149.56

MTFNR 85-5D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...