CNMG 120404 Chip Breaker BF Grade FM2543 / CNMG 431 BF #FMCarbide

CNMG 120404 / CNMG 431, chip breaker BF, grade FM2543 — negative 80° rhombic turning insert.

1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general steel work — continuous through interrupted cuts across steel applications.

Specifications

• Insert designation (ISO): CNMG 120404
• Insert designation (inch): CNMG 431
• Insert shape: 80° rhombic (C)
• Clearance angle: 0° — negative (N)
• Tolerance class: M
• Insert type: G — with hole, chipbreaker both sides
• Inscribed circle (I.C.): 1/2" (12.7 mm)
• Thickness: 3/16" (4.76 mm)
• Corner radius: 1/64" (0.4 mm)
• Chip breaker: BF — Steel — finishing
• Feed rate range: 0.002–0.010 ipr (0.05–0.25 mm/rev)
• Depth of cut range: 0.02–0.06" (0.5–1.5 mm)
• Grade: FM2543
• Coating: CVD
• ISO application range: P15–P30
• Cutting speed, non-alloy steel: 590–1250 SFM (180–380 m/min)
• Cutting speed, low-alloy steel: 380–1150 SFM (110–350 m/min)
• Cutting speed, high-alloy steel: 200–980 SFM (60–300 m/min)

Tool holders that accept this insert

69 RMC toolholders in stock take this insert — 80° rhombic, 0° — negative clearance, 1/2" inscribed circle, 3/16" thick. Pick by the shank your turret takes.

RMC square-shank toolholders — made in the USA

Boring bars and interchangeable heads. 66 more RMC tools take the same insert for internal turning. See RMC boring bars →

Grade & chip breaker selection chart →

Turning insert designations explained · Using a turning formula calculator