CNMG 120404 / CNMG 431, chip breaker BG, grade FM524 — negative 80° rhombic turning insert.
1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.
Specifications
-
Insert designation (ISO): CNMG 120404
-
Insert designation (inch): CNMG 431
-
Insert shape: 80° rhombic (C)
-
Clearance angle: 0° — negative (N)
-
Tolerance class: M
-
Insert type: G — with hole, chipbreaker both sides
-
Inscribed circle (I.C.): 1/2" (12.7 mm)
-
Thickness: 3/16" (4.76 mm)
-
Corner radius: 1/64" (0.4 mm)
-
Chip breaker: BG — Steel — medium machining
-
Feed rate range: 0.008–0.016 ipr (0.2–0.4 mm/rev)
-
Depth of cut range: 0.06–0.16" (1.5–4 mm)
-
Grade: FM524
-
Coating: CVD
-
ISO application range: P01–P10 · K10–K25
-
Cutting speed, non-alloy steel: 720–1570 SFM (220–480 m/min)
-
Cutting speed, low-alloy steel: 720–1380 SFM (220–420 m/min)
-
Cutting speed, grey cast iron: 560–1380 SFM (170–420 m/min)
-
Cutting speed, nodular cast iron: 390–1340 SFM (120–410 m/min)
Tool holders that accept this insert
69 RMC toolholders in stock take this insert — 80° rhombic, 0° — negative clearance, 1/2" inscribed circle, 3/16" thick. Pick by the shank your turret takes.
RMC square-shank toolholders — made in the USA
Boring bars and interchangeable heads. 66 more RMC tools take the same insert for internal turning. See RMC boring bars →
Grade & chip breaker selection chart →
Turning insert designations explained · Using a turning formula calculator
