CCMT 120404 Chip Breaker BF Grade FM524 / CCMT 431 BF #FMCarbide

CCMT 120404 / CCMT 431, chip breaker BF, grade FM524 — positive 80° rhombic turning insert.

1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the Finishing geometry: 0.002–0.008 ipr (0.05–0.2 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.

Specifications

• Insert designation (ISO): CCMT 120404
• Insert designation (inch): CCMT 431
• Insert shape: 80° rhombic (C)
• Clearance angle: 7° (C)
• Tolerance class: M
• Insert type: T — with hole, countersunk one side, chipbreaker one side
• Inscribed circle (I.C.): 1/2" (12.7 mm)
• Thickness: 3/16" (4.76 mm)
• Corner radius: 1/64" (0.4 mm)
• Chip breaker: BF — Finishing
• Feed rate range: 0.002–0.008 ipr (0.05–0.2 mm/rev)
• Depth of cut range: 0.02–0.06" (0.5–1.5 mm)
• Grade: FM524
• Coating: CVD
• ISO application range: P01–P10 · K10–K25
• Cutting speed, non-alloy steel: 720–1570 SFM (220–480 m/min)
• Cutting speed, low-alloy steel: 720–1380 SFM (220–420 m/min)
• Cutting speed, grey cast iron: 560–1380 SFM (170–420 m/min)
• Cutting speed, nodular cast iron: 390–1340 SFM (120–410 m/min)

Tool holders that accept this insert

7 RMC toolholders in stock take this insert — 80° rhombic, 7° clearance, 1/2" inscribed circle, 3/16" thick. Pick by the shank your turret takes.

RMC square-shank toolholders — made in the USA

Boring bars and interchangeable heads. 7 more RMC tools take the same insert for internal turning. See RMC boring bars →

Grade & chip breaker selection chart →

Turning insert designations explained · Using a turning formula calculator