7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat
7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat

7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute SE Solid Carbide Hot Mill Ball Nose Standard Length Sky Coat

Solid Carbide Hot Mill
$26.31 each
Item #
Quantity
- +

7/32" OD x 1/4" Shank OD x 3/4" LOC x 2-1/2" OAL 4-Flute Single End Solid Carbide Hot Mill, Ball Nose, Standard Length, Sky Coat.

This solid-carbide Hot Mill is designed for heat- and wear-resistant performance in demanding milling applications. The ball-nose profile supports contoured surfaces, fillets, molds, dies, and three-dimensional toolpaths.

The Sky Coat finish is intended to support lubricity and wear resistance in suitable milling applications.

Specifications

  • Cutting diameter: 7/32"
  • Shank diameter: 1/4"
  • Length of cut (LOC): 3/4"
  • Overall length (OAL): 2-1/2"
  • Flutes: 4
  • End type: Single End
  • End geometry: Ball Nose
  • Tool family: Hot Mill
  • Corner radius: None specified
  • Length style: Standard Length
  • Coating: Sky Coat
  • Tool material: Solid Carbide
  • Series: 811
  • EDP number: Not listed
  • Item number: 811-2188

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide