SICTFPR 24-3 — boring bar, 1.500" bar diameter, 1.840" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling.
-5° End Cutting Edge Angle for Positive Triangle TPG Inserts.
Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at the depths where boring bars usually give up.
Sized by minimum bore, so start there: pick the largest bar diameter your bore will clear. Every clamp, lock pin, seat and screw in this bar is a stocked RMC service part, listed below.
These are the service parts RMC lists for this exact model — not a generic cross-reference. Every one is stocked.
| Insert | TPG-322 — 3/8" I.C. · 1/8" thick · 1/32" nose radius |
| Seat / shim | SM-41 |
| Seat screw | S-4 |
| Clamp | HC-12 |
| Clamp clip | CLIP-12 |
| Clamp screw | CS-126 |
| Chipbreaker (optional) | T3AE |
See all RMC spare parts & hardware →
Not sure how to read an insert code? Turning insert designation explained.
Dimensions as published in the RMC 2020 catalog, page 46.
