SIMCLNR 16-3 -5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts

SIMCLNR 16-3 — boring bar, 1.00" bar diameter, 1.280" minimum bore, 12.0" overall length. Made in the USA by RMC Tooling.

-5° Side & End Cutting Edge Angle for Negative 80° Diamond CNM_ Inserts.

Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a rigid clamping system sized to the bar diameter — the combination that keeps chatter down at the depths where boring bars usually give up.

Sized by minimum bore, so start there: pick the largest bar diameter your bore will clear. Every clamp, lock pin, seat and screw in this bar is a stocked RMC service part, listed below.

Specifications

• Model: SIMCLNR 16-3
• Minimum bore: 1.280"
• Bar diameter (D): 1.00"
• Overall length (C): 12.0"
• Lead angle (K°): 10°
• Holding method: screw only
• Holder style: straight shank, 40° side cutting edge angle
• Holder rake: 7° positive
• Hand: left hand
• Brand: RMC Tooling — made in the USA

Exact replacement parts for this tool

These are the service parts RMC lists for this exact model — not a generic cross-reference. Every one is stocked.

See all RMC spare parts & hardware →

Not sure how to read an insert code? Turning insert designation explained.

Dimensions as published in the RMC 2020 catalog, page 47.