5/8" Spoon Cutter - Center Cut. Single End with 35 Degree Helix. Shank OD 5/8" - LOC 1-5/8" - OAL 3-1/2" - Standerd radius 0.030-0.035" - 3 Flutes for SS Machining. Uncoated

5/8" Spoon Cutter, center cutting, single end, 35° helix, 3 flutes, 0.030-0.035" corner radius, uncoated.

A spoon cutter is a center-cutting single-end mill with a gashed, spoon-shaped end, so it can plunge straight into the material and then feed sideways without a pilot hole. This one is ground from solid carbide and cuts 5/8" diameter on a 5/8" shank, with 1-5/8" of flute and 3-1/2" overall.

Stainless work-hardens the moment the edge stops cutting, so this geometry is ground to keep a positive rake and shear the chip rather than rub it.

The uncoated, polished flute leaves the sharpest possible edge — the usual choice for aluminium and other soft, sticky materials where a coating only adds edge radius.

Specifications

• Cutting diameter: 5/8"
• Shank diameter: 5/8"
• Length of cut (LOC): 1-5/8"
• Overall length (OAL): 3-1/2"
• Flutes: 3
• End type: Single End
• Center cutting: Yes
• Corner radius: 0.030–0.035"
• Helix angle: 35°
• Coating: Uncoated
• Tool material: Solid Carbide
• Intended for: SS Machining
• Series: 712
• Item number: 712-4666