3/16" Spoon Cutter - Center Cut. Single End with 35 Degree Helix. Shank OD 3/16" - LOC 5/16" - OAL 2" - Standerd radius 0.008-0.010" - 3 Flutes for SS Machining. AlTiN Coated

3/16" Spoon Cutter, center cutting, single end, 35° helix, 3 flutes, 0.008-0.010" corner radius, AlTiN Coated.

A spoon cutter is a center-cutting single-end mill with a gashed, spoon-shaped end, so it can plunge straight into the material and then feed sideways without a pilot hole. This one is ground from solid carbide and cuts 3/16" diameter on a 3/16" shank, with 5/16" of flute and 2" overall.

Stainless work-hardens the moment the edge stops cutting, so this geometry is ground to keep a positive rake and shear the chip rather than rub it.

The AlTiN coating carries heat away from the cutting edge, which is what lets the tool hold up in stainless and other higher-temperature alloys.

Specifications

• Cutting diameter: 3/16"
• Shank diameter: 3/16"
• Length of cut (LOC): 5/16"
• Overall length (OAL): 2"
• Flutes: 3
• End type: Single End
• Center cutting: Yes
• Corner radius: 0.008–0.010"
• Helix angle: 35°
• Coating: AlTiN Coated
• Tool material: Solid Carbide
• Intended for: SS Machining
• Series: 713
• Item number: 713-9908