3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated — HTC Mfg.
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated — HTC Mfg.
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated
3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated

3/16" End Mill Single End Square. Tapered Mill. Shank OD 3/4" - LOC 3/4" OAL 2-1/2" - 3 Flutes TiN Coated

End Mill
$49.08 each
Item #
Series
Coating
Quantity
- +

3/16" cutting diameter, 3 flutes, single end, square end, TiN coated.

Ground from solid carbide. This tool cuts 3/16" diameter, runs a 3/4" shank, has 3/4" of flute and measures 2-1/2" overall.

The square end cuts a flat floor with a sharp corner — slots, pockets, shoulders and side milling.

The TiN coating adds surface hardness and lubricity over uncoated carbide or HSS in general-purpose work.

Specifications

  • Cutting diameter: 3/16"
  • Shank diameter: 3/4"
  • Length of cut (LOC): 3/4"
  • Overall length (OAL): 2-1/2"
  • Flutes: 3
  • End type: Single End
  • End geometry: Square End
  • Coating: TiN
  • Tool material: Solid Carbide
  • Item number: 97255

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide