5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute SE Solid Carbide High-Performance Multi-Flute End Mill Square End .030" Corner Radius 45° Helix AlTiN — HTC Mfg.
5/8" End Mill Single End. High Performance 45 Degree Helix. Shank OD 5/8" Flute Lenght 3" OAL 6" Corner Radius 0.030" - 5 Flutes - HTC Coated
5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute SE Solid Carbide High-Performance Multi-Flute End Mill Square End .030" Corner Radius 45° Helix AlTiN
5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute SE Solid Carbide High-Performance Multi-Flute End Mill Square End .030" Corner Radius 45° Helix AlTiN — HTC Mfg.
5/8" End Mill Single End. High Performance 45 Degree Helix. Shank OD 5/8" Flute Lenght 3" OAL 6" Corner Radius 0.030" - 5 Flutes - HTC Coated
5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute SE Solid Carbide High-Performance Multi-Flute End Mill Square End .030" Corner Radius 45° Helix AlTiN

5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute SE Solid Carbide High-Performance Multi-Flute End Mill Square End .030" Corner Radius 45° Helix AlTiN

Solid Carbide Multi-Flute End Mill
$145.46 each
Item #
Quantity
- +

5/8" OD x 5/8" Shank OD x 3" LOC x 6" OAL 5-Flute Single End Solid Carbide High-Performance Multi-Flute End Mill, Square End, .030" Corner Radius, 45° Helix, Aluminum Titanium Nitride (AlTiN).

This high-performance multi-flute end mill is designed for efficient peripheral and finish milling. The 45° helix and increased flute count support smooth cutting action, productive feed rates, and consistent surface finish in rigid setups. The square-end profile includes a .030" corner radius to strengthen the cutting corner while producing a controlled edge radius.

The AlTiN coating supports heat and wear resistance in demanding milling applications.

Specifications

  • Cutting diameter: 5/8"
  • Shank diameter: 5/8"
  • Length of cut (LOC): 3"
  • Overall length (OAL): 6"
  • Flutes: 5
  • End type: Single End
  • End geometry: Square End
  • Tool family: High-Performance Multi-Flute End Mill
  • Corner radius: .030"
  • Helix angle: 45°
  • Center cutting: Not specified
  • Coating: Aluminum Titanium Nitride (AlTiN)
  • Tool material: Solid Carbide
  • Series: 381
  • EDP number: Not listed
  • Item number: 381-5626-030

Availability and Shipping

For HTC carbide tools, coating service typically adds 2–3 calendar days when the uncoated tool is available. If the tool is not in stock, estimated time to ship is 7–10 calendar days.

Estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide