1/4" End Mill High Performance. 45-Degree LOC 3/4" OAL 2-1/2" - 3 Flutes Uncoated
1/4" End Mill High Performance. 45-Degree LOC 3/4" OAL 2-1/2" - 3 Flutes Uncoated
1/4" End Mill High Performance. 45-Degree LOC 3/4" OAL 2-1/2" - 3 Flutes Uncoated
1/4" End Mill High Performance. 45-Degree LOC 3/4" OAL 2-1/2" - 3 Flutes Uncoated

1/4" End Mill High Performance. 45-Degree LOC 3/4" OAL 2-1/2" - 3 Flutes Uncoated

End Mill
$10.29 each
Item #
Series
Coating
Quantity
- +

1/4" cutting diameter, 3 flutes, uncoated.

Ground from solid carbide. This tool cuts 1/4" diameter, has 3/4" of flute and measures 2-1/2" overall.

Uncoated, so the edge stays as sharp as it can be ground — the usual choice for aluminium and other soft, sticky materials.

Specifications

  • Cutting diameter: 1/4"
  • Length of cut (LOC): 3/4"
  • Overall length (OAL): 2-1/2"
  • Flutes: 3
  • Coating: Uncoated
  • Tool material: Solid Carbide
  • Series: 390
  • Item number: 390-4514

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide