11/32" OD x 3/8" Shank OD x 9/16" LOC x 2-1/2" OAL 2-Flute DE Solid Carbide End Mill Square End Stub Length TiCN — HTC Mfg.
HTC Mfg. End Mill generic category product image
11/32" OD x 3/8" Shank OD x 9/16" LOC x 2-1/2" OAL 2-Flute DE Solid Carbide End Mill Square End Stub Length TiCN — HTC Mfg.
HTC Mfg. End Mill generic category product image

11/32" OD x 3/8" Shank OD x 9/16" LOC x 2-1/2" OAL 2-Flute DE Solid Carbide End Mill Square End Stub Length TiCN

Solid Carbide End Mill
$19.64 each
Item
Quantity
- +

11/32" OD x 3/8" Shank OD x 9/16" LOC x 2-1/2" OAL 2-Flute Double End Solid Carbide End Mill, Square End, Stub Length, Titanium Carbonitride (TiCN).

The solid-carbide construction provides rigidity, edge retention, and dimensional stability for production milling. The square-end profile is suited to slots, pockets, shoulders, side milling, and flat-bottom features.

The TiCN coating provides a hard, low-friction surface intended to improve wear resistance.

Specifications

  • Cutting diameter: 11/32"
  • Shank diameter: 3/8"
  • Length of cut (LOC): 9/16"
  • Overall length (OAL): 2-1/2"
  • Flutes: 2
  • End type: Double End
  • End geometry: Square End
  • Tool family: End Mill
  • Corner radius: None specified
  • Helix angle: Not specified
  • Center cutting: Not specified
  • Hand of cut: Right hand / standard
  • Length style: Stub Length
  • Coating: Titanium Carbonitride (TiCN)
  • Tool material: Solid Carbide
  • Series: 192
  • EDP number: Not listed
  • Item number: 192-2343

Availability and Shipping

For HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.

Unless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide