Metric End Mills-Standard Length-Single End Ball-SKY COAT-2 Flute - 15MM X 16MM X 32MM X 88MM — HTC Mfg.
HTC Mfg. End Mill generic category product image
Metric End Mills-Standard Length-Single End Ball-SKY COAT-2 Flute - 15MM X 16MM X 32MM X 88MM — HTC Mfg.
HTC Mfg. End Mill generic category product image

15mm OD x 16mm Shank OD x 32mm LOC x 88mm OAL 2-Flute SE Solid Carbide Metric End Mill Ball Nose Standard Length Sky Coat

Solid Carbide Metric End Mill
$77.57 each
Item
Quantity
- +

15mm OD x 16mm Shank OD x 32mm LOC x 88mm OAL 2-Flute Single End Solid Carbide Metric End Mill, Ball Nose, Standard Length, Sky Coat.

This metric solid-carbide end mill provides rigidity, edge retention, and dimensional stability for production milling. The ball-nose profile is suited to contoured surfaces, fillets, molds, dies, and three-dimensional toolpaths. Its standard-length proportions support a practical balance of reach and rigidity for production milling.

The Sky Coat finish is intended to support lubricity and wear resistance in suitable milling applications.

Specifications

  • Cutting diameter: 15mm
  • Shank diameter: 16mm
  • Length of cut (LOC): 32mm
  • Overall length (OAL): 88mm
  • Flutes: 2
  • End type: Single End
  • End geometry: Ball Nose
  • Tool family: Metric End Mill
  • Length style: Standard Length
  • Coating: Sky Coat
  • Tool material: Solid Carbide
  • Series: 956
  • EDP number: Not listed
  • Item number: 956-2590

Availability and Shipping

For HTC carbide tools, if the uncoated tool is available and coating is needed, estimated time to ship is 3–4 business days. If the tool is not in stock, estimated time to ship is 7–10 calendar days. For items that require manufacturing, contact us for a confirmed estimated ship date.

Unless stated otherwise, estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide