1-3/4" OD x 1-1/4" Shank OD x 2" LOC x 4-1/2" OAL 6-Flute SE Cobalt HSS Roughing End Mill 30° H NC SQ Regular TiCN-PG — HTC Mfg.
HTC Mfg. Carbide Roughing End Mill generic category product image
1-3/4" OD x 1-1/4" Shank OD x 2" LOC x 4-1/2" OAL 6-Flute SE Cobalt HSS Roughing End Mill 30° H NC SQ Regular TiCN-PG — HTC Mfg.
HTC Mfg. Carbide Roughing End Mill generic category product image

1-3/4" OD x 1-1/4" Shank OD x 2" LOC x 4-1/2" OAL 6-Flute SE Cobalt HSS Roughing End Mill 30° H NC SQ Regular TiCN-PG EDP #76104

Cobalt HSS Roughing End Mill
$157.23 each
Item
Quantity
- +

1-3/4" OD x 1-1/4" Shank OD x 2" LOC x 4-1/2" OAL 6-Flute Single End Cobalt High-Speed Steel (HSS) Standard Roughing End Mill, 30° Helix, Non-Center Cut, Square End, Regular Length, TiCN Premium Grade Coating.

This 6-flute cobalt high-speed steel roughing end mill combines HSS toughness with improved hot hardness for demanding material-removal applications. The chip-breaking roughing geometry is designed for productive stock removal in slots, pockets, shoulders, and side-milling operations before finishing passes. The non-center-cutting geometry is intended for side milling and requires an existing entry path for axial engagement.

The TiCN Premium Grade coating provides a hard, low-friction surface intended to improve wear resistance in suitable rough-milling applications.

Specifications

  • Cutting diameter: 1-3/4"
  • Shank diameter: 1-1/4"
  • Length of cut (LOC): 2"
  • Overall length (OAL): 4-1/2"
  • Flutes: 6
  • End type: Single End
  • End geometry: Square End
  • Cutting style: Roughing
  • Roughing profile: Standard
  • Helix angle: 30°
  • Center cutting: Non-Center Cut
  • Length style: Regular Length
  • Coating: TiCN Premium Grade Coating
  • Material: Cobalt High-Speed Steel (HSS)
  • EDP number: 76104
  • Item number: KQC-56MCN

Availability and Shipping

If an HTC HSS or cobalt tool is not in stock, estimated time to ship is 10–15 calendar days.

Estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide