Search results

PSSNL12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

SNMG 120408 Chip Breaker BR Grade FM2553 / SNMG 432 BR #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

SIMSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SNMG 120408 Chip Breaker BG Grade FM2553 / SNMG 432 BG #FMCarbide

$8.21 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

PSKNR12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

PSKNR20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSTNL16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSKNR855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

PSKNR16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...

MSDNN854D Tool Holder 45° Lead Angle SNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

MSTNR10CA-3C Cartridge 60° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

MSTNR12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SIMSKNL 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$346.17 each

SIMSKNL 28-4 — boring bar, 1.75" bar diameter, 2.010" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSTNL10CA-3C Cartridge 60° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

PSKNL12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SNMG 543 Turning Insert, RC Chipbreaker, 0.047" Corner Radius, Grade TN30

$16.68 each

10 inserts per box

Canela reference SNMG543RC — square turning insert, grade TN30. Original Canela indexable insert, 0.625" cutting edge and 0.047" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG543RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.625" Thickness (T): 0.250" Inscribed circle (d): 0.625" Corner radius...

MSSNR124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR866E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

SIMSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSDNN083A Tool Holder 45° Lead Angle SNM 32 Insert

$61.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SIMSKNL 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$288.44 each

SIMSKNL 20-4 — boring bar, 1.25" bar diameter, 1.470" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

PSKNR25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

MSRNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSDNN164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120404 Chip Breaker BF Grade FM2553 / SNMG 431 BF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

PSC63-DSDNN00065-12 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00065-12 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00065-12 Coupling: PSC...

PSC32-DSDNN00048-12 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$263.23 each

Canela reference PSC32-DSDNN00048-12 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC32-DSDNN00048-12 Coupling: PSC...

SNMG 120404 Chip Breaker BMF Grade FM2553 / SNMG 431 BMF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BMF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BMF breaker is the finishing geometry: 0.003–0.012 ipr (0.07–0.3 mm/rev) at 0.01–0.06" (0.2–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

SNMG 120408 Chip Breaker BC Grade FM2553 / SNMG 432 BC #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade...

PSKNL25CA-15 Cartridge 75° Lead Angle SNMG 54 Insert

$234.43 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL25CA-15 Dimension D: 3.937" Length (L): 3.937" Length (L1): 1.967" Width (b): 0.984" Dimension...

SNMG 120408 Chip Breaker BR Grade FM2543 / SNMG 432 BR #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general...

SNMG 120408 Chip Breaker BG Grade FM2543 / SNMG 432 BG #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

SIMSKNL 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNL 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

MSSNR20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSTNR20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SIMSKNR 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$346.17 each

SIMSKNR 28-4 — boring bar, 1.75" bar diameter, 2.010" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SNMG 644 Turning Insert, RC Chipbreaker, 0.063" Corner Radius, Grade TN30

$22.15 each

10 inserts per box

Canela reference SNMG644RC — square turning insert, grade TN30. Original Canela indexable insert, 0.750" cutting edge and 0.063" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG644RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.750" Thickness (T): 0.250" Inscribed circle (d): 0.750" Corner radius...

MSSNL10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

PSSNL20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN30

$9.62 each

10 inserts per box

Canela reference SNMG432MHC — square turning insert, grade TN30. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...