Search results

MSKNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSTNR16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSRNR20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSKNL20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SIMSKNR 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$288.44 each

SIMSKNR 20-4 — boring bar, 1.25" bar diameter, 1.470" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SI-MSKNL 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$448.89 each

SI-MSKNL 36-6 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSSNL20CA-5C Cartridge 45° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL20CA-5C Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSKNR10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 433 CHIP BREAKER RC GRADE TN30 / SNMG 120412 RC TN30

$9.76 each

10 inserts per box

Canela reference SNMG433-RC — square (S) turning insert, grade TN30. Original Canela indexable insert and 3/64" (1.19 mm) corner radius. Sold individually, no minimum order.Specifications Reference: SNMG433-RC ISO designation: SNMG 120412 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: RC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

MSSNL866E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN856D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNL20CA-5C Cartridge 60° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

SIMSKNR 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNR 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

S32V-MSKNR5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSDNN246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-DSDNN00065-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00065-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00065-15 Coupling: PSC...

MSRNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN20

$9.62 each

10 inserts per box

Canela reference SNMG432MHC — square turning insert, grade TN20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

SNMA 120408 Grade FM2533 / SNMA 432 #FMCarbide

$8.21 each

10 inserts per box

SNMA 120408 / SNMA 432, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 120408 Insert designation (inch): SNMA...

S32V-MSKNL5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PSC63-PSDNN00065-19 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-PSDNN00065-19 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSDNN00065-19 Coupling: PSC...

MSDNN103B Tool Holder 45° Lead Angle SNM 32 Insert

$64.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNL16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

MSKNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL20CA-5C Cartridge 75° Lead Angle SNMG 54 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSKNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSSNL12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

SNMG 432 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$12.74 each

10 inserts per box

Canela reference SNMG432TC — square turning insert, grade TS20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432TC Insert shape: square (S) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MSKNL164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120404 Chip Breaker BF Grade FM2543 / SNMG 431 BF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general...

DSRNL205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMSKNL 24-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$317.30 each

SIMSKNL 24-4 — boring bar, 1.50" bar diameter, 1.760" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SNMG 120408 Chip Breaker BC Grade FM2543 / SNMG432 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN206D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120408 Chip Breaker BG Grade FM324 / SNMG 432 BG #FMCarbide

$7.92 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade...

MSDNN165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNL12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

PSC50-DSDNN00060-12 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-DSDNN00060-12 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSDNN00060-12 Coupling: PSC...

MSRNR124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

NL-810 Lock Pin — 7/16-20 UNF, A5/32" key, 2.0 N·m

$19.66 each

Canela reference NL-810 — lock pin. Original lock pin for Canela indexable turning tooling. The lock pin holds the insert clamp in a double-lock or top-clamp toolholder. Sold individually, no minimum order.Specifications Reference: NL-810 Part type: Lock pin Thread (a): 7/16-20 UNF Dimension b: 0.236" Dimension b1: 0.377" Overall length...