Search results

MTANR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNR164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DTJNL164DAN Tool Holder 93° Lead Angle TNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S24U-WTUNL4 Boring Bar 93° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

A32V-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$386.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

PTGNL20CA-22 Cartridge 90° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTGNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MDJNR20CA-4C Cartridge 93° Lead Angle DN 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTFNL854D Tool Holder 90° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL204D Tool Holder 75° Lead Angle TNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

H40 MTHOL 4W Interchangeable Head for CNC Turning

$490.38 each

H40 MTHOL 4W — interchangeable head, 2.500" head diameter, 3.375" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

PTTNL20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNL20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

DTJNL204DAN Tool Holder 93° Lead Angle TNM 43 Insert

$137.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...

TNMA 434 Turning Insert, 0.063" Corner Radius, Grade TK15

$11.40 per insert$114.00 per box of 10

Canela reference TNMA434 — triangular turning insert, grade TK15. Original Canela indexable insert, 0.866" cutting edge and 0.063" corner radius. Specifications Reference: TNMA434 Insert shape: triangular (T) Clearance angle: 0° Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.063" Grade: TK15 Brand: Canela...

S20U-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNL164C Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNR12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

H32 MTHOL 4W Interchangeable Head for CNC Turning

$464.43 each

H32 MTHOL 4W — interchangeable head, 2.000" head diameter, 2.875" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MDJNL16CA-4C Cartridge 93° Lead Angle DN 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MDJNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSRNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

S24U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTJNR S20-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$86.86 each

Right Hand Tool Holder MTJN R S 20-4D - OAL = 6" - F = 1.5" - A = 1.25"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 20-4D Shank height (A):...

S20U-WTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTGNL204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSKNR12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

DDJNR244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMC-43 Threading Insert, Triangular Negative, 3/8" IC, Grade TN15

$30.60 per insert$306.00 per box of 10

Canela reference TNMC-43.. — threading insert. Original Canela indexable threading insert. Thread form to order. Canela grinds this insert to the thread form and pitch you specify. Send us the thread with your order and we confirm it the same day.Specifications Reference: TNMC-43.. Insert style: Triangular negative insert for threading...

DDJNL244EAN Tool Holder 93° Lead Angle DN 43 Insert

$219.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNL854D Tool Holder 93° Lead Angle DN 43 Insert

$140.83 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MRGNL854D Tool Holder RNMG 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S28U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$316.03 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MVJNR854D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR864D Tool Holder 93° Lead Angle VN 43 Insert

$126.81 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNL20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTFNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

DDJNR124BN Tool Holder 93° Lead Angle DN 43 Insert

$119.54 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR164D Tool Holder 93° Lead Angle DN 43 Insert

$117.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTJNRS 16-4D Tool Holder 93° End Cutting Edge Angle TNM_ 43 Insert

$79.05 each

Right Hand Tool Holder MTJN R S 16-4D - OAL = 6" - F = 1.25" - A = 1"Multipurpose toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Profiling and copying toolholder for specific applications, roughing, semi finishing and finishing. ​Specifications Model: MTJNRS 16-4D Shank height (A):...

DDJNR244EN Tool Holder 93° Lead Angle DN 43 Insert

$143.54 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...

MRGNR164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MRGNR864D Tool Holder RNMG 43 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

TNMG 431 Turning Insert, FC Chipbreaker, 0.016" Corner Radius, Grade TN15

$11.40 per insert$114.00 per box of 10

Canela reference TNMG431FC — triangular turning insert, grade TN15. Original Canela indexable insert, 0.866" cutting edge and 0.016" corner radius. Specifications Reference: TNMG431FC Insert shape: triangular (T) Clearance angle: 0° Chipbreaker: FC Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.016" Grade: TN15...

MRGNR204D Tool Holder RNMG 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MRGNL124B Tool Holder RNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTGNL864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...