Search results

MRGNR124B Tool Holder RNMG 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR124B Tool Holder 93° Lead Angle DN 43 Insert

$114.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A32V-STCNR4 Vertical Threading Boring Bar, Right Hand, 2" Bar, TNMC-43 Inserts

$399.88 each

Canela reference A32V-STCNR4 — right hand vertical threading boring bar. Vertical on edge threading boring bar.Specifications Reference: A32V-STCNR4 Hand of tool: Right hand Bar diameter (D): 2.00" Dimension B: 2.260" Dimension F: 1.260" Overall length (L1): 16.00" Length L2: 1.12" Insert size: TNMC-43 Tightening torque: 3.5 N·m (insert screw) /...

MTFNL204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNR16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MWLNR16CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

DDJNR124BAN Tool Holder 93° Lead Angle DN 43 Insert

$183.02 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTHOR 10-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$62.90 each

MTHOR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTGNL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTRNL164D Tool Holder 75° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MTFNL164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR164D Tool Holder 90° Lead Angle TNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

H24 MTHOL 4W Interchangeable Head for CNC Turning

$330.04 each

H24 MTHOL 4W — interchangeable head, 1.500" head diameter, 2.625" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...

MTHOR 12-3B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 each

MTHOR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MWLNR12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MTHOL 12-4B Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$75.00 each

MTHOL 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

S24U-WTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

DNMG 431 CHIP BREAKER FC GRADE TN15 / DNMG 150404 FC TN15

$13.90 per insert$139.00 per box of 10

Canela reference DNMG431-FC — 55° rhombic (D) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Specifications Reference: DNMG431-FC ISO designation: DNMG 150404 Insert shape: 55° rhombic (D) Clearance angle: 0° — negative (N) Chipbreaker: FC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2"...

DSRNR164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 per insert$97.60 per box of 10

Canela reference SNMG431-FMC — square (S) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Specifications Reference: SNMG431-FMC ISO designation: SNMG 120404 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle (d): 1/2" (12.7 mm)...

TNMA 433 Turning Insert, 0.047" Corner Radius, Grade TK15

$11.40 per insert$114.00 per box of 10

Canela reference TNMA433 — triangular turning insert, grade TK15. Original Canela indexable insert, 0.866" cutting edge and 0.047" corner radius. Specifications Reference: TNMA433 Insert shape: triangular (T) Clearance angle: 0° Cutting edge length (l): 0.866" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius (r): 0.047" Grade: TK15 Brand: Canela...

MSKNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MRGNL204D Tool Holder RNMG 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MTFNR204D Tool Holder 90° Lead Angle TNM 43 Insert

$86.86 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MDJNR854D Tool Holder 93° Lead Angle DN 43 Insert

$140.83 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

A28V-STCNR5 Vertical Threading Boring Bar, Right Hand, 1.75" Bar, TNMC-43 Inserts

$333.30 each

Canela reference A28V-STCNR5 — right hand vertical threading boring bar. Vertical on edge threading boring bar.Specifications Reference: A28V-STCNR5 Hand of tool: Right hand Bar diameter (D): 1.75" Dimension B: 2.375" Dimension F: 1.500" Overall length (L1): 16.00" Length L2: 1.88" Insert size: TNMC-43 Tightening torque: 3.5 N·m (insert screw) /...

MTHOL 16-4D Tool Holder Gang Tool Holder for Shallow Grooving or I.D. Threading for Triangle TNMA_Inserts

$112.11 each

MTHOL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. Gang Toolholder for Shallow Grooving or I.D. Threading for Triangle TNMA Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so...

MTGNL20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MTCNN644F Tool Holder 90° Lead Angle TNM 43 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 each

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MDJNL244D Tool Holder 93° Lead Angle DN 43 Insert

$165.29 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MVJNR204D Tool Holder 93° Lead Angle VN 43 Insert

$136.80 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S16T-MDUNR4 Boring Bar 93° Lead Angle DN 43 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S16T-MWLNR4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

S20U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

A24U-STCNR4 Vertical Threading Boring Bar, Right Hand, 1.5" Bar, TNMC-43 Inserts

$316.65 each

Canela reference A24U-STCNR4 — right hand vertical threading boring bar. Vertical on edge threading boring bar.Specifications Reference: A24U-STCNR4 Hand of tool: Right hand Bar diameter (D): 1.50" Dimension B: 1.734" Dimension F: 0.984" Overall length (L1): 14.00" Length L2: 1.12" Insert size: TNMC-43 Tightening torque: 3.5 N·m (insert screw) /...

MVJNR244E Tool Holder 93° Lead Angle VN 43 Insert

$175.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MWLNR20CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$169.47 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

DDJNL124BAN Tool Holder 93° Lead Angle DN 43 Insert

$183.02 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DDJNR164DAN Tool Holder 93° Lead Angle DN 43 Insert

$187.20 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSYNR16CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

PSKNL12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MRGNL164D Tool Holder RNMG 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MRGNL864D Tool Holder RNMG 43 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSKNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...