Search results for "snm 54"

SIMSKNR Boring Bar

SIMSKNR 28-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$346.17 $560.80

SIMSKNR 28-4 — boring bar, 1.75" bar diameter, 2.010" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNR20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
SIMSKNR Boring Bar

SIMSKNR 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 $700.98

SIMSKNR 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNL16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MSKNR Tool Holder

MSKNR 24-6E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 $177.56

MSKNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNR20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNR20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNL12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSRNR248E Tool Holder — Canela, FM Carbide

MSRNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSKN cartridge - Canela, FM Carbide

MSKNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSSNR Tool Holder

MSSNR 24-6ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 $177.56

MSSNR 24-6E — toolholder, 1.50" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNL20CA-5C Cartridge 85° Lead Angle SNMG 54 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL20CA-5C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MSSNR866E Tool Holder — Canela, FM Carbide

MSSNL246E Tool Holder 45° Lead Angle SNM 64 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSKNL Tool Holder

MSKNL 24-6E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 $177.56

MSKNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MSKN cartridge - Canela, FM Carbide

MSKNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSRN cartridge - Canela, FM Carbide

MSRNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MSTNR20CA-5C Cartridge — Canela, FM Carbide

MSTNL12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
DSDNN246EAN Tool Holder — Canela, FM Carbide

DSDNN206DAN Tool Holder 45° Lead Angle SNM 64 Insert

$158.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DSDNN246EAN Tool Holder — Canela, FM Carbide

DSDNN246EAN Tool Holder 45° Lead Angle SNM 64 Insert

$185.57

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DSSNR246EN Tool Holder — Canela, FM Carbide

DSSNR124BN Tool Holder 45° Lead Angle SNM 43 Insert

$76.88

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNL12CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL12CA-12 Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSSNR866E Tool Holder — Canela, FM Carbide

MSSNL124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSNR Tool Holder

MSSNR 20-4ETool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$121.82 $152.27

MSSNR 20-4E — toolholder, 1.25" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
DSDNN246EAN Tool Holder — Canela, FM Carbide

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
PSKNR25CA-15 Cartridge — Canela, FM Carbide

PSKNL16CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MSDNN856D Tool Holder — Canela, FM Carbide

MSDNN856D Tool Holder 45° Lead Angle SNM 64 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSKN cartridge - Canela, FM Carbide

MSKNL16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...