Search results

MSKNL246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR246E Tool Holder 75° Lead Angle SNM 64 Insert

$118.45 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSTNL10CA-3C Cartridge 60° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMA 190616 Grade FM2533 / SNMA 644 #FMCarbide

$11.26 each

10 inserts per box

SNMA 190616 / SNMA 644, grade FM2533 — negative square turning insert.3/4" inscribed circle, 1/4" thick, 1/16" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 190616 Insert designation (inch): SNMA...

MSSNL 85-4D Tool Holder 45 Side Cutting Edge Angle for Negative Square SNM_Inserts

$120.20 each

MSSNL 85-4D — toolholder, 1.00" × 1.25" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 45° Side Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...

SIMSKNR 20-4 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$288.44 each

SIMSKNR 20-4 — boring bar, 1.25" bar diameter, 1.470" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSRNL206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMA 120412 Chip Breaker BC Grade FM524 / SNMA 433 BC #FMCarbide

$8.32 each

10 inserts per box

SNMA 120412 / SNMA 433, chip breaker BC, grade FM524 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade —...

MSSNR164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG120408 Chip Breaker BR Grade FM524 / SNMG 432 BR #FMCarbide

$5.24 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM524 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM524 is a CVD grade — gray cast iron and...

SNMG 120404 Chip Breaker BMF Grade FM2553 / SNMG 431 BMF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BMF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BMF breaker is the finishing geometry: 0.003–0.012 ipr (0.07–0.3 mm/rev) at 0.01–0.06" (0.2–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

MSKNR124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSDNN206DAN Tool Holder 45° Lead Angle SNM 64 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120412 Chip Breaker BR Grade FM324 / SNMG 433 BR #FMCarbide

$7.92 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BR, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for...

MSYNL10CA-3C Cartridge 85° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SIMSKNL 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNL 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMSKNR 40-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$432.70 each

SIMSKNR 40-6 — boring bar, 2.50" bar diameter, 3.030" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SNMA 120412 Grade FM2533 / SNMA 433 #FMCarbide

$5.78 each

10 inserts per box

SNMA 120412 / SNMA 433, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 120412 Insert designation (inch): SNMA...

SNMG 431 CHIP BREAKER FMC GRADE TN15 / SNMG 120404 FMC TN15

$9.76 each

10 inserts per box

Canela reference SNMG431-FMC — square (S) turning insert, grade TN15. Original Canela indexable insert and 1/64" (0.4 mm) corner radius. Sold individually, no minimum order.Specifications Reference: SNMG431-FMC ISO designation: SNMG 120404 Insert shape: square (S) Clearance angle: 0° — negative (N) Chipbreaker: FMC Thickness (T): 3/16" (4.76 mm) Inscribed circle...

SNMA 120408 Grade FM2533 / SNMA 432 #FMCarbide

$8.21 each

10 inserts per box

SNMA 120408 / SNMA 432, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 120408 Insert designation (inch): SNMA...

MSRNR248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR206DAN Tool Holder 75° Lead Angle SNM 64 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120404 Chip Breaker BF Grade FM324 / SNMG 431 BF #FMCarbide

$7.92 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade for...

MSRNL248E Tool Holder 75° Lead Angle SNM 85 Insert

$128.90 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120408 Chip Breaker BR Grade FM2553 / SNMG 432 BR #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

MSRNR206D Tool Holder 75° Lead Angle SNM 64 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120404 Chip Breaker BF Grade FM2553 / SNMG 431 BF #FMCarbide

$8.21 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

MSDNN854D Tool Holder 45° Lead Angle SNM 43 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SI-MSKNL 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$448.89 each

SI-MSKNL 36-6 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSKNL164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SIMSKNR 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNR 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

DSSNR206DN Tool Holder 45° Lead Angle SNM 64 Insert

$103.35 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMA 120408 Chip Breaker BC Grade FM524 / SNMA 432 BC #FMCarbide

$8.32 each

10 inserts per box

SNMA 120408 / SNMA 432, chip breaker BC, grade FM524 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade —...

MSSNL164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNL10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

MSRNL164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 120408 Chip Breaker BG Grade FM524 / SNMG 432 BG #FMCarbide

$5.24 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM524 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM524 is a CVD grade — gray cast iron...

MSKNL 24-6E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 each

MSKNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

SI-MSKNR 36-6 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$448.89 each

SI-MSKNR 36-6 — boring bar, 2.25" bar diameter, 2.812" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

SIMSKNL 32-5 15° End Cutting Edge Angle for Negative Square SNM_ Inserts

$375.00 each

SIMSKNL 32-5 — boring bar, 2.00" bar diameter, 2.562" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...

MSKNR 24-8E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 each

MSKNR 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSKNR164D Tool Holder 75° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120412 Chip Breaker BC Grade FM2553 / SNMG 433 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BC, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade...

MSKNL 24-8E Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$109.60 each

MSKNL 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...

MSDNN103B Tool Holder 45° Lead Angle SNM 32 Insert

$64.95 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S24U-MSKN L 4 - 75° Side & End Cutting Edge Angle

$285.91 each

Left Hand Boring Bar S24U-MSKN 4 - 75° Side & End Cutting Edge Angle - OAL = 14" Cutting Length = 3" Internal turning and profiling boring bar equipped with rhombic negative double-sided insert (angle 55º). Specifications Model: S24U-MSKNL4 Bar diameter (D): 1.500" Minimum bore (A): 1.780" Overall length (L1):...

MSKNR 12-3B Tool Holder 15 End Cutting Edge Angle for Negative Square SNM_Inserts

$75.04 each

MSKNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 15° End Cutting Edge Angle for Negative Square SNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...