Search results

DSDNN205DAN Tool Holder 45° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSKNL20CA-12 Cartridge 75° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSKNL20CA-12 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...

MSSNR10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

MSTNL16CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...

MSTNL12CA-4C Cartridge 60° Lead Angle SNMG 43 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...

MSYNR10CA-3C Cartridge 85° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 120408 Chip Breaker BR Grade FM2553 / SNMG 432 BR #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate for...

SNMG 644 Turning Insert, RC Chipbreaker, 0.063" Corner Radius, Grade TN30

$22.15 each

10 inserts per box

Canela reference SNMG644RC — square turning insert, grade TN30. Original Canela indexable insert, 0.750" cutting edge and 0.063" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG644RC Insert shape: square (S) Clearance angle: 0° Chipbreaker: RC Cutting edge length (l): 0.750" Thickness (T): 0.250" Inscribed circle (d): 0.750" Corner radius...

SNMG 120408 Chip Breaker BG Grade FM2553 / SNMG 432 BG #FMCarbide

$8.21 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade — tough substrate...

SNMG 120408 Chip Breaker BG Grade FM324 / SNMG 432 BG #FMCarbide

$7.92 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM324 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM324 is a PVD grade — universal multi-purpose grade...

MSSNR124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120412 Chip Breaker BC Grade FM2553 / SNMG 433 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BC, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade...

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN30

$9.62 each

10 inserts per box

Canela reference SNMG432MHC — square turning insert, grade TN30. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

SNMG 120412 Chip Breaker BC Grade FM2533 / SNMG 433 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BC, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade —...

MSDNN165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-PSDNN00060-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-PSDNN00060-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSDNN00060-15 Coupling: PSC...

DSRNR205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-DSDNN00060-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$295.75 each

Canela reference PSC50-DSDNN00060-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSDNN00060-15 Coupling: PSC...

SNMG 432 Turning Insert, KC Chipbreaker, 0.031" Corner Radius, Grade TK15

$10.59 each

10 inserts per box

Canela reference SNMG432KC — square turning insert, grade TK15. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432KC Insert shape: square (S) Clearance angle: 0° Chipbreaker: KC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MSRNR10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 120404 Chip Breaker BF Grade FM2533 / SNMG 431 BF #FMCarbide

$5.78 each

10 inserts per box

SNMG 120404 / SNMG 431, chip breaker BF, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/64" corner radius. The BF breaker is the finishing geometry: 0.002–0.010 ipr (0.05–0.25 mm/rev) at 0.02–0.06" (0.5–1.5 mm) depth of cut. FM2533 is a CVD grade — stable steel applications and...

SNMG 120412 Chip Breaker BC Grade FM2543 / SNMG 433 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120412 / SNMG 433, chip breaker BC, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 3/64" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

SNMA150612 Grade FM524 / SNMA 543 #FMCarbide

$7.88 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM524 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM524 is a CVD grade — gray cast iron and very stable steel — the hardest substrate with CVD coating for extreme wear resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation...

PSC50-DSRNL27060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSRNL27060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNL27060-15 Coupling: PSC 50 (ISO...

MSDNN205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120408 Chip Breaker BC Grade FM2553 / SNMG 432 BC #FMCarbide

$7.80 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2553 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2553 is a CVD (Al₂O₃) grade...

DSRNL205DAN Tool Holder 75° Lead Angle SNM 54 Insert

$158.09 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSSNL20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNL20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...

MSRNR205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-DSRNR27060-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSRNR27060-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSRNR27060-15 Coupling: PSC 50 (ISO...

MSKNL855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSKNR165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 120408 Chip Breaker BG Grade FM2533 / SNMG 432 BG #FMCarbide

$8.21 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade — stable steel applications...

SNMG 120408 Chip Breaker BR Grade FM2533 / SNMG 432 BR #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2533 is a CVD grade — stable steel applications and...

SNMG 432 Turning Insert, MHC Chipbreaker, 0.031" Corner Radius, Grade TN20

$9.62 each

10 inserts per box

Canela reference SNMG432MHC — square turning insert, grade TN20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432MHC Insert shape: square (S) Clearance angle: 0° Chipbreaker: MHC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

MSSNR205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

SNMG 120408 Chip Breaker BC Grade FM2533 / SNMG 432 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2533 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2533 is a CVD grade —...

SNMG 120408 Chip Breaker BR Grade FM2543 / SNMG 432 BR #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BR, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BR breaker is the roughing geometry: 0.012–0.024 ipr (0.3–0.6 mm/rev) at 0.08–0.24" (2–6 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for general...

MSTNR10CA-3C Cartridge 60° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

MSSNL205D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-DSDNN00065-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-DSDNN00065-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSDNN00065-15 Coupling: PSC...

SNMG 120408 Chip Breaker BG Grade FM2543 / SNMG 432 BG #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BG, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BG breaker is the medium machining geometry: 0.008–0.016 ipr (0.2–0.4 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade — first-choice grade for...

MSKNR10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 120408 Chip Breaker BC Grade FM2543 / SNMG432 BC #FMCarbide

$5.78 each

10 inserts per box

SNMG 120408 / SNMG 432, chip breaker BC, grade FM2543 — negative square turning insert.1/2" inscribed circle, 3/16" thick, 1/32" corner radius. The BC breaker is the medium roughing & cast iron geometry: 0.008–0.020 ipr (0.2–0.5 mm/rev) at 0.06–0.16" (1.5–4 mm) depth of cut. FM2543 is a CVD grade —...

MSYNL10CA-3C Cartridge 85° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

SNMG 432 Turning Insert, TC Chipbreaker, 0.031" Corner Radius, Grade TS20

$12.74 each

10 inserts per box

Canela reference SNMG432TC — square turning insert, grade TS20. Original Canela indexable insert, 0.500" cutting edge and 0.031" corner radius. Sold individually, no minimum order.Specifications Reference: SNMG432TC Insert shape: square (S) Clearance angle: 0° Chipbreaker: TC Cutting edge length (l): 0.500" Thickness (T): 0.187" Inscribed circle (d): 0.500" Corner radius...

PSC50-DSSNL35050-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSSNL35050-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSSNL35050-15 Coupling: PSC...

PSC50-PSRNL27060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-PSRNL27060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSRNL27060-15 Coupling: PSC 50 (ISO...