Search results

PSC63-PSSNL45054-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-PSSNL45054-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSSNL45054-15 Coupling: PSC...

MSSNL10CA-3C Cartridge 45° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNL10CA-3C Dimension D: 1.575" Length (L): 1.732" Length (L1): 0.945" Width (b): 0.433" Dimension...

MSTNL10CA-3C Cartridge 60° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSTNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

PSC50-DSSNR35050-15 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSSNR35050-15 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSSNR35050-15 Coupling: PSC...

MSDNN855D Tool Holder 45° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

3515 Square Shim Seat — 0.574"

$18.11 each

Canela reference 3515 — square shim seat. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 3515 Part type: Square Shim Seat Dimension a: 0.311" Dimension b: 0.187" Dimension c: 0.574" Brand: Canela Dimensions in inches, as published in the Canela spare-parts catalog,...

PSC63-DSSNL45054-15 PSC Modular Toolholder, 45° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSSNL45054-15 — PSC modular toolholder, left hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSSNL45054-15 Coupling: PSC...

MSSNR165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL205D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-PSRNR27060-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-PSRNR27060-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSRNR27060-15 Coupling: PSC 50 (ISO...

DSDNN124BAN Tool Holder 45° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL165D Tool Holder 75° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC50-DSKNL35060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-DSKNL35060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSKNL35060-15 Coupling: PSC 50 (ISO...

MSSNL165D Tool Holder 45° Lead Angle SNM 54 Insert

$94.61 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC40-PSDNN00050-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$265.55 each

Canela reference PSC40-PSDNN00050-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC40-PSDNN00050-15 Coupling: PSC...

PSC50-PSKNR35060-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-PSKNR35060-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSKNR35060-15 Coupling: PSC 50 (ISO...

PSC50-PSKNL35060-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$295.75 each

Canela reference PSC50-PSKNL35060-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-PSKNL35060-15 Coupling: PSC 50 (ISO...

MSKNL10CA-3C Cartridge 75° Lead Angle SNMG 32 Insert

$154.92 each

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSKNL10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...

PSC50-DSKNR35060-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$295.75 each

Canela reference PSC50-DSKNR35060-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC50-DSKNR35060-15 Coupling: PSC 50 (ISO...

PSC63-PSSNR45054-15 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-PSSNR45054-15 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSSNR45054-15 Coupling: PSC...

PSC63-DSSNR45054-15 PSC Modular Toolholder, 45° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-DSSNR45054-15 — PSC modular toolholder, right hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSSNR45054-15 Coupling: PSC...

MSKNR855D Tool Holder 75° Lead Angle SNM 54 Insert

$103.97 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-PSDNN00065-15 PSC Modular Toolholder, 45° Lead Angle, Neutral Hand

$339.10 each

Canela reference PSC63-PSDNN00065-15 — PSC modular toolholder, neutral hand. Toolholder for external turning and chamfering applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSDNN00065-15 Coupling: PSC...

PSC63-PSRNL35065-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-PSRNL35065-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSRNL35065-15 Coupling: PSC 63 (ISO...

SNMA 150612 Grade FM2533 / SNMA 543 #FMCarbide

$12.33 each

10 inserts per box

SNMA 150612 / SNMA 543, grade FM2533 — negative square turning insert.5/8" inscribed circle, 1/4" thick, 3/64" corner radius. FM2533 is a CVD grade — stable steel applications and nodular cast iron — a balance of wear resistance and chipping resistance.Specifications Insert designation (ISO): SNMA 150612 Insert designation (inch): SNMA...

PSC63-DSRNL35065-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSRNL35065-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSRNL35065-15 Coupling: PSC 63 (ISO...

S32V-MSKNR5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

1508 Screw — M8x1.25R, A4 key, 3.5 N·m

$4.20 each

Canela reference 1508 — screw. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 1508 Part type: Screw Thread (a): M8x1.25R Dimension b: 0.196" Dimension c: 0.314" Wrench size: A4 Tightening torque: 3.5 N·m Brand: Canela Dimensions in inches, as published in the...

DSRNL124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR124BAN Tool Holder 75° Lead Angle SNM 43 Insert

$118.06 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR124BN Tool Holder 45° Lead Angle SNM 43 Insert

$76.88 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

RMC Insert Shims — Models MTN-432 to TSN-533

$7.46 each

Replacement shims and shim seats for indexable turning and milling tool holders are available. The shim protects the holder pocket from insert breakage—replacing a worn shim is far cheaper than replacing the holder. Covers the common negative and positive insert geometries (CNMG, DNMG, SNMG, TNMG, WNMG, VNMG, and more—match the...

DSSNR164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNL124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSRNR124B Tool Holder 75° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

MSDNN124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL124BN Tool Holder 45° Lead Angle SNM 43 Insert

$76.88 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNR204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL164DN Tool Holder 45° Lead Angle SNM 43 Insert

$82.22 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

1408 Adjustable Screw — M8x1.25, A3 key, 3.0 N·m

$9.37 each

Canela reference 1408 — adjustable screw. Original spare part for Canela indexable turning and milling tooling. Sold individually, no minimum order.Specifications Reference: 1408 Part type: Adjustable Screw Thread (a): M8x1.25 Dimension b: 0.590" Dimension c: 0.826" Dimension d: 0.511" Wrench size: A3 Tightening torque: 3.0 N·m Brand: Canela Dimensions in...

DSDNN164DAN Tool Holder 45° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNL164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSRNR164DAN Tool Holder 75° Lead Angle SNM 43 Insert

$125.34 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

PSC63-DSRNR35065-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-DSRNR35065-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSRNR35065-15 Coupling: PSC 63 (ISO...

PSC63-PSRNR35065-15 PSC Modular Toolholder, 75° Lead Angle, Right Hand

$339.10 each

Canela reference PSC63-PSRNR35065-15 — PSC modular toolholder, right hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-PSRNR35065-15 Coupling: PSC 63 (ISO...

PSC63-DSKNL45065-15 PSC Modular Toolholder, 75° Lead Angle, Left Hand

$339.10 each

Canela reference PSC63-DSKNL45065-15 — PSC modular toolholder, left hand. Toolholder for face turning applications equipped with square negative inserts. PSC with internal coolant. The PSC polygonal shank coupling (ISO 26623-1) clamps from inside, so the head changes in seconds and repeats to the micron.Specifications Reference: PSC63-DSKNL45065-15 Coupling: PSC 63 (ISO...

MSDNN164D Tool Holder 45° Lead Angle SNM 43 Insert

$79.05 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

S32V-MSKNL5 Boring Bar 75° Lead Angle SNM 54 Insert

$336.39 each

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...

MSSNL124B Tool Holder 45° Lead Angle SNM 43 Insert

$74.32 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...

DSSNL204DN Tool Holder 45° Lead Angle SNM 43 Insert

$89.96 each

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...