Search results for "tnma 43ngl"

PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR20CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR20CA-12 Dimension D: 2.756" Length (L): 2.362" Length (L1): 1.181" Width (b): 0.787" Dimension...
WWLN boring bar - Canela, FM Carbide

S16T-WWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL124B Tool Holder RNMG 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
S40V-MTFNL4 Boring Bar — Canela, FM Carbide

S20U-MTFNL4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNL855D Tool Holder 93° Lead Angle DN 54 Insert

$145.55

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNL245E Tool Holder 90° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MWLN toolholder - Canela, FM Carbide

MWLNR123B Tool Holder 95° Lead Angle WNMG 33 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTJNL Tool Holder

MTJNL 86-5E Tool Holder 3 Side Cutting Edge Angle for Negative Triangle TNM_Inserts

$77.44 $96.80

MTJNL 86-5E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 3°Side Cutting Edge Angle for Negative Triangle TNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface,...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR12CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR12CA-12 Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
S40V-MDUNL5 Boring Bar — Canela, FM Carbide

S16T-MDUNL4 Boring Bar 93° Lead Angle DN 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
Canela NT4L Top Notch threading insert, left hand

NT4L Top Notch Threading Insert, Left Hand, Grade TN15

$46.07

Canela reference NT4L — Top Notch threading insert, left hand, grade TN15. Top Notch inserts clamp from the top, so you change the insert without taking the tool out of the turret. Sold individually, no minimum order.Specifications Reference: NT4L Insert style: Top Notch insert for threading Hand of insert: Left...
MCFN cartridge - Canela, FM Carbide

MCFNR20CA-4C Cartridge 90° Lead Angle CN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCFNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
PCFNR25CA-16 Cartridge — Canela, FM Carbide

PCFNL16CA-12 Cartridge 90° Lead Angle CN 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PCFNL16CA-12 Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.496" Width (b): 0.787" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNR10CA-3C Cartridge 95° Lead Angle WNMG 33 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR10CA-3C Dimension D: 1.575" Length (L): 1.969" Length (L1): 1.181" Width (b): 0.433" Dimension...
MSRN cartridge - Canela, FM Carbide

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
S40V-WTFNR4 Boring Bar — Canela, FM Carbide

S24U-WTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$285.91

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
SIMTFNL Boring Bar

SIMTFNL 28-4 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$346.17 $560.80

SIMTFNL 28-4 — boring bar, 1.75" bar diameter, 2.312" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. 0° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSYNR20CA-5C Cartridge — Canela, FM Carbide

MSYNR12CA-4C Cartridge 85° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSYNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNL164DN Tool Holder 93° Lead Angle DN 43 Insert

$122.09

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNR204DN Tool Holder 93° Lead Angle DN 43 Insert

$135.17

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR864D Tool Holder 90° Lead Angle TNM 43 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MCLN cartridge - Canela, FM Carbide

MCLNL20CA-4C Cartridge 95° Lead Angle CN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNL20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MCLN cartridge - Canela, FM Carbide

MCLNR20CA-4C Cartridge 95° Lead Angle CN 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MCLNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
S40V-MTFNR4 Boring Bar — Canela, FM Carbide

S20U-MTFNR4 Boring Bar 90° Lead Angle TNM 43 Insert

$260.52

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
S24U-MWLNL4 Boring Bar — Canela, FM Carbide

S16T-MWLNL4 Boring Bar 95° Lead Angle WNMG 43 Insert

$243.79

Steel-shank indexable boring bar from Canela. Rigid clamping sized to the bar diameter, which is what keeps chatter down at the depths where boring bars usually give up. Start from the minimum bore: pick the largest bar diameter your bore will clear, and you get the stiffest tool for the...
MDJNR855D Tool Holder — Canela, FM Carbide

MDJNL124B Tool Holder 93° Lead Angle DN 43 Insert

$114.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DDJNR244EN Tool Holder — Canela, FM Carbide

DDJNR244EN Tool Holder 93° Lead Angle DN 43 Insert

$143.54

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR854D Tool Holder RNMG 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
DWLNR244EN Tool Holder — Canela, FM Carbide

DWLNL124BAN Tool Holder 95° Lead Angle WNMG 43 Insert

$118.06

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MWLN toolholder - Canela, FM Carbide

MWLNL244E Tool Holder 95° Lead Angle WNMG 43 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MWLN toolholder - Canela, FM Carbide

MWLNL163D Tool Holder 95° Lead Angle WNMG 33 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTANR245D Tool Holder — Canela, FM Carbide

MTANR245D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTFN toolholder - Canela, FM Carbide

MTFNL865D Tool Holder 90° Lead Angle TNM 54 Insert

$118.45

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTANR245D Tool Holder — Canela, FM Carbide

MTANR082A Tool Holder 90° Lead Angle TNM 22 Insert

$61.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTGNR865D Tool Holder — Canela, FM Carbide

MTGNR082A Tool Holder 90° Lead Angle TNM 22 Insert

$61.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
Canela TNGA332 ceramic turning insert, triangular negative insert

TNGA332 Ceramic Turning Insert, Triangular Negative, 0.031" Radius, Grade CC7

$15.33

Canela reference TNGA332 — ceramic turning insert, grade CC7. Original Canela ceramic insert. Sold individually, no minimum order.Specifications Reference: TNGA332 Insert shape: Triangular negative insert Cutting edge length (l): 0.650" Thickness (T): 0.187" Inscribed circle (d): 0.375" Corner radius (r): 0.031" Grade: CC7 Brand: Canela Grade CC7. Hard materials (H),...
MVJNR864D Tool Holder — Canela, FM Carbide

MVJNL244E Tool Holder 93° Lead Angle VN 43 Insert

$175.20

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MTENNS246E Tool Holder — Canela, FM Carbide

MTEN NS 12-3B Tool Holder 60° End Cutting Edge Angle TNM__33__ Insert

$74.32

Neutral Hand Tool Holder MTENNS 12-3B - OAL = 4" - A = 0.75"Copying toolholder equipped with triangular negative double-sided inserts with strong cutting edges. Copying toolholder for general applications, roughing, semi-finishing and finishing. Specifications Model: MTENNS 12-3B Shank height (A): 0.750" Shank width (B): 0.750" Overall length (C): 4.50"...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL204D Tool Holder RNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...