Search results for "rnmg 43"

MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR854D Tool Holder RNMG 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR204D Tool Holder RNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL854D Tool Holder RNMG 43 Insert

$103.97

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL164D Tool Holder RNMG 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR864D Tool Holder RNMG 43 Insert

$128.90

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL204D Tool Holder RNMG 43 Insert

$86.86

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL124B Tool Holder RNMG 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR164D Tool Holder RNMG 43 Insert

$79.05

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNL864D Tool Holder RNMG 43 Insert

$128.90

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MRGNR864D Tool Holder — Canela, FM Carbide

MRGNR124B Tool Holder RNMG 43 Insert

$74.32

Indexable turning toolholder from Canela. The shank is ground to a qualified reference surface, so the tool returns to the same cutting-point location every time it goes back in the turret. The insert pocket, seat and clamping hardware are standard Canela service parts, so the holder stays in service instead...
MSSN cartridge - Canela, FM Carbide

MSSNR16CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR16CA-4C Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
MSSN cartridge - Canela, FM Carbide

MSSNR12CA-4C Cartridge 45° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSSNR12CA-4C Dimension D: 1.969" Length (L): 1.850" Length (L1): 1.063" Width (b): 0.630" Dimension...
MWLN cartridge - Canela, FM Carbide

MWLNR12CA-4C Cartridge 95° Lead Angle WNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MWLNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MTUN cartridge - Canela, FM Carbide

MTUNR20CA-4C Cartridge 93° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTUNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MTGN cartridge - Canela, FM Carbide

MTGNR20CA-4C Cartridge 90° Lead Angle TNMG 43 Insert

$169.47

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MTGNR20CA-4C Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...
MRGNR Tool Holder

MRGNR 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 16-3D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNL 16-3D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNL 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 12-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$75.04 $121.56

MRGNR 12-4B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 12-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$72.83 $117.98

MRGNR 12-3B — toolholder, 0.750" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
SIMVJNR Boring Bar

SIMVJNR 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 $747.70

SIMVJNR 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
SIMVJNL Boring Bar

SIMVJNL 40-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$461.54 $747.70

SIMVJNL 40-4 — boring bar, 2.50" bar diameter, 3.750" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
MTHOL Interchangeable Head

H40 MTHOL 4W Interchangeable Head for CNC Turning

$490.38 $794.42

H40 MTHOL 4W — interchangeable head, 2.500" head diameter, 3.375" minimum bore. Made in the USA by RMC Tooling. H-MTHOR/L Heads. Interchangeable boring head from RMC Tooling, machined in the United States. The head mounts on a matching RMC bar, so one bar covers a whole family of geometries and...
SIMVJNR Boring Bar

SIMVJNR 28-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$375.00 $607.50

SIMVJNR 28-4 — boring bar, 1.75" bar diameter, 3.000" minimum bore, 14.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
SIMTJNR Boring Bar

SIMTJNR 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNR 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
SIMTJNL Boring Bar

SIMTJNL 40-5 -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts

$432.70 $700.98

SIMTJNL 40-5 — boring bar, 2.50" bar diameter, 3.062" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° End Cutting Edge Angle for Negative Triangle TNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and a...
MSRN cartridge - Canela, FM Carbide

MSRNL12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNL12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MSRN cartridge - Canela, FM Carbide

MSRNR16CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR16CA-4C Dimension D: 2.362" Length (L): 2.480" Length (L1): 1.497" Width (b): 0.787" Dimension...
MSRN cartridge - Canela, FM Carbide

MSRNR12CA-4C Cartridge 75° Lead Angle SNMG 43 Insert

$154.92

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: MSRNR12CA-4C Dimension D: 1.969" Length (L): 2.165" Length (L1): 1.378" Width (b): 0.630" Dimension...
MRGNL Tool Holder

MRGNL 10-4B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNL 10-4B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 24-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-4E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNR 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MRGNL Tool Holder

MRGNL 85-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$92.32 $149.56

MRGNL 85-4D — toolholder, 1.000" × 1.250" shank (width × height), 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
SIMVJNR Boring Bar

SIMVJNR 32-4 -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts

$403.86 $654.26

SIMVJNR 32-4 — boring bar, 2.00" bar diameter, 3.250" minimum bore, 16.0" overall length. Made in the USA by RMC Tooling. -3° Side Cutting Edge Angle for Negative 35° Diamond VNM_ Inserts. Steel-shank indexable boring bar from RMC Tooling, machined in the United States. Ground shank, standard indexable geometry, and...
MRGNL Tool Holder

MRGNL 16-4D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNL 16-4D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 16-5D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-5D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 16-6D Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$86.53 $140.18

MRGNR 16-6D — toolholder, 1.000" square shank, 6.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNL 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 24-6E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-6E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNR Tool Holder

MRGNR 10-3B Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$62.92 $78.65

MRGNR 10-3B — toolholder, 0.625" square shank, 4.5" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
MRGNL Tool Holder

MRGNL 86-4E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$77.44 $96.80

MRGNL 86-4E — toolholder, 1.000" × 1.500" shank (width × height), 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference...
MRGNR Tool Holder

MRGNR 24-8E Tool Holder 0 Side Cutting Edge Angle for Negative Round RNM_Inserts

$109.60 $177.56

MRGNR 24-8E — toolholder, 1.500" square shank, 7.0" overall length. Made in the USA by RMC Tooling. 0° Side Cutting Edge Angle for Negative Round RNM_ Inserts. Indexable turning toolholder from RMC Tooling, machined in the United States. The shank is ground to a qualified reference surface, so the tool...
PSSNR20CA-12 Cartridge — Canela, FM Carbide

PSSNR16CA-12 Cartridge 45° Lead Angle SNMG 43 Insert

$184.03

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PSSNR16CA-12 Dimension D: 2.362" Length (L): 2.087" Length (L1): 1.102" Width (b): 0.787" Dimension...
PTTNR20CA-22 Cartridge — Canela, FM Carbide

PTTNR20CA-22 Cartridge 60° Lead Angle TNMG 43 Insert

$201.68

Indexable cartridge from Canela, for boring heads and special tooling where the cutting unit is mounted directly into the body. Sized to a standard insert, so replacements are off-the-shelf rather than made to order. Specifications Model: PTTNR20CA-22 Dimension D: 2.756" Length (L): 2.756" Length (L1): 1.575" Width (b): 0.787" Dimension...