1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute SE Solid Carbide Turbo Mill Roughing End Mill Square End Bright (Uncoated) — HTC Mfg.
1/2" End Mill Single End Square. Roughing "HOG" Turbo Mill. Shank OD 1/2" Flute Length 1-1/4" OAL 3" - 4 Flutes - Uncoated
1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute SE Solid Carbide Turbo Mill Roughing End Mill Square End Bright (Uncoated)
1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute SE Solid Carbide Turbo Mill Roughing End Mill Square End Bright (Uncoated) — HTC Mfg.
1/2" End Mill Single End Square. Roughing "HOG" Turbo Mill. Shank OD 1/2" Flute Length 1-1/4" OAL 3" - 4 Flutes - Uncoated
1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute SE Solid Carbide Turbo Mill Roughing End Mill Square End Bright (Uncoated)

1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute SE Solid Carbide Turbo Mill Roughing End Mill Square End Bright (Uncoated)

Solid Carbide Turbo Mill
$49.04 each
Item #
Quantity
- +

1/2" OD x 1/2" Shank OD x 1-1/4" LOC x 3" OAL 4-Flute Single End Solid Carbide Turbo Mill Roughing End Mill, Square End, Bright Finish (Uncoated).

This coarse-pitch hog-style Turbo Mill is designed for aggressive stock removal. Its serrated roughing geometry breaks chips into smaller segments, helps reduce cutting pressure, and supports productive roughing passes when the machine, holder, and work material are suitable. The square-end profile is suited to roughing slots, pockets, shoulders, and peripheral surfaces.

The bright, uncoated cutting edge is suitable where an added coating is not required.

Specifications

  • Cutting diameter: 1/2"
  • Shank diameter: 1/2"
  • Length of cut (LOC): 1-1/4"
  • Overall length (OAL): 3"
  • Flutes: 4
  • End type: Single End
  • End geometry: Square End
  • Tool family: Turbo Mill Roughing End Mill
  • Roughing style: Coarse-Pitch Hog Rougher
  • Coating: Bright Finish (Uncoated)
  • Tool material: Solid Carbide
  • Series: 300
  • EDP number: Not listed
  • Item number: 300-4500

Availability and Shipping

For HTC carbide tools, coating service typically adds 2–3 calendar days when the uncoated tool is available. If the tool is not in stock, estimated time to ship is 7–10 calendar days.

Estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide