1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill
1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill

1/4" End Mill Variable Single End; Flute Length 1-1/8" OAL 3" - 4 Flutes AlTiN - Hot Mill

End Mill
$184.52 each
Item #
Series
Coating
Quantity
- +

1/4" cutting diameter, 4 flutes, single end, AlTiN coated.

This tool cuts 1/4" diameter, has 1-1/8" of flute and measures 3" overall.

AlTiN is built for heat: stainless, tool steels and high-temperature alloys, especially with little or no coolant.

Specifications

  • Cutting diameter: 1/4"
  • Length of cut (LOC): 1-1/8"
  • Overall length (OAL): 3"
  • Flutes: 4
  • End type: Single End
  • Coating: AlTiN
  • Series: 850
  • Item number: 850-2500

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide