1" OD x 1" Shank OD x 6" LOC x 8-1/2" OAL 5-Flute SE Cobalt HSS Truncated Roughing End Mill 30° H NC SQ Extra-Long TiN-V — HTC Mfg.
HTC Mfg. Carbide Roughing End Mill generic category product image
1" OD x 1" Shank OD x 6" LOC x 8-1/2" OAL 5-Flute SE Cobalt HSS Truncated Roughing End Mill 30° H NC SQ Extra-Long TiN-V — HTC Mfg.
HTC Mfg. Carbide Roughing End Mill generic category product image

1" OD x 1" Shank OD x 6" LOC x 8-1/2" OAL 5-Flute SE Cobalt HSS Truncated Roughing End Mill 30° H NC SQ Extra-Long TiN-V EDP #72258

Cobalt HSS Roughing End Mill
$112.51 each
Item
Quantity
- +

1" OD x 1" Shank OD x 6" LOC x 8-1/2" OAL 5-Flute Single End Cobalt High-Speed Steel (HSS) Truncated-Tooth Roughing End Mill, 30° Helix, Non-Center Cut, Square End, Extra-Long Length, TiN-V Coating.

This 5-flute cobalt high-speed steel roughing end mill combines HSS toughness with improved hot hardness for demanding material-removal applications. The truncated-tooth roughing profile breaks chips and distributes cutting load for productive stock removal before semi-finishing or finishing operations. The non-center-cutting geometry is intended for side milling and requires an existing entry path for axial engagement.

The TiN-V coating provides a hard, low-friction surface for general rough-milling applications.

Specifications

  • Cutting diameter: 1"
  • Shank diameter: 1"
  • Length of cut (LOC): 6"
  • Overall length (OAL): 8-1/2"
  • Flutes: 5
  • End type: Single End
  • End geometry: Square End
  • Cutting style: Roughing
  • Roughing profile: Truncated
  • Helix angle: 30°
  • Center cutting: Non-Center Cut
  • Length style: Extra-Long Length
  • Coating: TiN-V Coating
  • Material: Cobalt High-Speed Steel (HSS)
  • EDP number: 72258
  • Item number: TQCX-32M5V

Availability and Dispatch

If an HTC HSS or cobalt tool is not in stock, estimated time to dispatch is 10–15 calendar days.

All dispatch estimates are in calendar days and refer to the time until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific dispatch date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide