3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated
3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated

3/16" End Mill Single End Ball. Flute Length 5/8" - OAL 2" - 2 Flutes TiCN Coated

Solid Carbide Ball End Mill
$12.39 each
Item #
Series
Coating
Quantity
- +

3/16" cutting diameter, 2 flutes, single end, ball nose, TiCN coated.

Ground from solid carbide. This tool cuts 3/16" diameter, has 5/8" of flute and measures 2" overall.

The ball nose leaves a radiused bottom, which is what you want for 3D contours, fillets and mold surfaces rather than flat floors.

TiCN is harder than TiN and holds up better in abrasive materials and higher feeds.

Specifications

  • Cutting diameter: 3/16"
  • Length of cut (LOC): 5/8"
  • Overall length (OAL): 2"
  • Flutes: 2
  • End type: Single End
  • End geometry: Ball Nose
  • Coating: TiCN
  • Tool material: Solid Carbide
  • Series: 143
  • Item number: 143-2187

Availability and Shipping

For HTC carbide tools, coating service typically adds 2–3 calendar days when the uncoated tool is available. If the tool is not in stock, estimated time to ship is 7–10 calendar days.

Estimated time to ship is measured in calendar days, from order placement until your order is handed to the carrier. Carrier transit time is additional. Orders may ship sooner. We accept orders awaiting replenishment; please contact us before ordering if you need a specific shipping date.

See our Shipping Policy for details.

Recently viewed

Dial In Your Cut

Free TechTips resources for end mill users — machinist tested.

Speeds & Feeds CalculatorsThe right RPM and feed rate for your end mill, material and setup.Open calculator → Chip Load (FPT) CalculatorFeed per tooth keeps carbide cutting instead of rubbing — with chip thinning compensation.Open calculator → MRR CalculatorHow hard your end mill is really working, and where your cycle time goes.Open calculator →

More help: Milling TechTips · Troubleshooting · Carbide vs. HSS Guide